TechnoRep - Faculty of Technology and Metallurgy Repository
University of Belgrade - Faculty of Technology and Metallurgy
    • English
    • Српски
    • Српски (Serbia)
  • English 
    • English
    • Serbian (Cyrillic)
    • Serbian (Latin)
  • Login
View Item 
  •   TechnoRep
  • Tehnološko-metalurški fakultet
  • Radovi istraživača / Researchers’ publications (TMF)
  • View Item
  •   TechnoRep
  • Tehnološko-metalurški fakultet
  • Radovi istraživača / Researchers’ publications (TMF)
  • View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.

Selection of the suitable polymer for supercritical fluid assisted preparation of carvedilol solid dispersions

Authorized Users Only
2019
Authors
Đuriš, Jelena
Milovanović, Stoja
Medarević, Đorđe
Dobričić, Vladimir
Dapčević, Aleksandra
Ibrić, Svetlana
Article (Published version)
Metadata
Show full item record
Abstract
Solid dispersions production is one of the substantial approaches for improvement of poor drug solubility. Additionally, supercritical fluid assisted method for preparation of solid dispersions can offer many advantages in comparison to the conventional melting or solvent-evaporation methods. Miscibility analysis provides valuable guidance for selection of the most appropriate polymeric carrier for dispersion of the drug of interest. In addition to the increased drug release rate, solid dispersions should have proper mechanical attributes in order to be successfully formulated in the final solid dosage form such as tablet. Therefore, several pharmaceutical grade polymers have been selected for development of BCS Class II drug carvedilol (CARV) solid dispersions. They were compared based on behavior in supercritical CO2 and affinity towards CARV calculated from the miscibility analysis. By utilization of the supercritical CO2 assisted method, solid dispersions of CARV with the selected ...(co) polymers (polyvinylpyrrolidone (PVP), hydroxypropyl methylcellulose (HPMC), Soluplus (R) and Eudragit (R)) were obtained. Properties of the prepared CARV-polymer dispersions were observed by the polarizing and scanning electron microscopy and analyzed by differential scanning calorimetry and Fourier transform infrared spectroscopy. CARV was additionally characterized by X-ray powder diffraction. Furthermore, in vitro dissolution studies and dynamic compaction analysis were performed on the selected samples of solid dispersions. Among the studied polymers, PVP and HPMC have been identified as polymers with the highest affinity towards CARV, based on the calculated delta(p) values. This has been also confirmed with the highest dissolution efficiency of CARV-PVP and CARV-HPMC solid dispersions. Solid state characterization indicated that CARV was dispersed either molecularly, or in the amorphous form, depending on interactions with each polymer. Determination of CARV-PVP and CARV-HPMC mechanical properties revealed that CARV-PVP solid dispersion has superior compactibility and tabletability. Therefore, CARV-PVP solid dispersion has been highlighted as the most appropriate for the further development of tablets as the final dosage form. Presented study provides an example for efficient approach for development of poorly soluble drug solid dispersion with satisfactory tableting properties.

Keywords:
Carvedilol / Supercritical CO2 / Solid dispersion / Improved dissolution / Tabletability
Source:
International Journal of Pharmaceutics, 2019, 554, 190-200
Publisher:
  • Elsevier Science Bv, Amsterdam
Funding / projects:
  • Advanced technologies for controlled release from solid drug delivery systems (RS-34007)
  • Functional physiologically active plant materials with additional values for application in pharmaceutical and food industry (RS-45017)
  • Zero- to Three-Dimensional Nanostructures for Application in Electronics and Renewable Energy Sources: Synthesis, Characterization and Processing (RS-45007)
Note:
  • Peer-reviewed manuscript: http://technorep.tmf.bg.ac.rs/handle/123456789/5030
Related info:
  • Version of
    http://technorep.tmf.bg.ac.rs/handle/123456789/5030

DOI: 10.1016/j.ijpharm.2018.11.015

ISSN: 0378-5173

PubMed: 30414899

WoS: 000454421400019

Scopus: 2-s2.0-85056454143
[ Google Scholar ]
20
17
URI
http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4335
Collections
  • Radovi istraživača / Researchers’ publications (TMF)
Institution/Community
Tehnološko-metalurški fakultet
TY  - JOUR
AU  - Đuriš, Jelena
AU  - Milovanović, Stoja
AU  - Medarević, Đorđe
AU  - Dobričić, Vladimir
AU  - Dapčević, Aleksandra
AU  - Ibrić, Svetlana
PY  - 2019
UR  - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/4335
AB  - Solid dispersions production is one of the substantial approaches for improvement of poor drug solubility. Additionally, supercritical fluid assisted method for preparation of solid dispersions can offer many advantages in comparison to the conventional melting or solvent-evaporation methods. Miscibility analysis provides valuable guidance for selection of the most appropriate polymeric carrier for dispersion of the drug of interest. In addition to the increased drug release rate, solid dispersions should have proper mechanical attributes in order to be successfully formulated in the final solid dosage form such as tablet. Therefore, several pharmaceutical grade polymers have been selected for development of BCS Class II drug carvedilol (CARV) solid dispersions. They were compared based on behavior in supercritical CO2 and affinity towards CARV calculated from the miscibility analysis. By utilization of the supercritical CO2 assisted method, solid dispersions of CARV with the selected (co) polymers (polyvinylpyrrolidone (PVP), hydroxypropyl methylcellulose (HPMC), Soluplus (R) and Eudragit (R)) were obtained. Properties of the prepared CARV-polymer dispersions were observed by the polarizing and scanning electron microscopy and analyzed by differential scanning calorimetry and Fourier transform infrared spectroscopy. CARV was additionally characterized by X-ray powder diffraction. Furthermore, in vitro dissolution studies and dynamic compaction analysis were performed on the selected samples of solid dispersions. Among the studied polymers, PVP and HPMC have been identified as polymers with the highest affinity towards CARV, based on the calculated delta(p) values. This has been also confirmed with the highest dissolution efficiency of CARV-PVP and CARV-HPMC solid dispersions. Solid state characterization indicated that CARV was dispersed either molecularly, or in the amorphous form, depending on interactions with each polymer. Determination of CARV-PVP and CARV-HPMC mechanical properties revealed that CARV-PVP solid dispersion has superior compactibility and tabletability. Therefore, CARV-PVP solid dispersion has been highlighted as the most appropriate for the further development of tablets as the final dosage form. Presented study provides an example for efficient approach for development of poorly soluble drug solid dispersion with satisfactory tableting properties.
PB  - Elsevier Science Bv, Amsterdam
T2  - International Journal of Pharmaceutics
T1  - Selection of the suitable polymer for supercritical fluid assisted preparation of carvedilol solid dispersions
EP  - 200
SP  - 190
VL  - 554
DO  - 10.1016/j.ijpharm.2018.11.015
UR  - conv_5739
ER  - 
@article{
author = "Đuriš, Jelena and Milovanović, Stoja and Medarević, Đorđe and Dobričić, Vladimir and Dapčević, Aleksandra and Ibrić, Svetlana",
year = "2019",
abstract = "Solid dispersions production is one of the substantial approaches for improvement of poor drug solubility. Additionally, supercritical fluid assisted method for preparation of solid dispersions can offer many advantages in comparison to the conventional melting or solvent-evaporation methods. Miscibility analysis provides valuable guidance for selection of the most appropriate polymeric carrier for dispersion of the drug of interest. In addition to the increased drug release rate, solid dispersions should have proper mechanical attributes in order to be successfully formulated in the final solid dosage form such as tablet. Therefore, several pharmaceutical grade polymers have been selected for development of BCS Class II drug carvedilol (CARV) solid dispersions. They were compared based on behavior in supercritical CO2 and affinity towards CARV calculated from the miscibility analysis. By utilization of the supercritical CO2 assisted method, solid dispersions of CARV with the selected (co) polymers (polyvinylpyrrolidone (PVP), hydroxypropyl methylcellulose (HPMC), Soluplus (R) and Eudragit (R)) were obtained. Properties of the prepared CARV-polymer dispersions were observed by the polarizing and scanning electron microscopy and analyzed by differential scanning calorimetry and Fourier transform infrared spectroscopy. CARV was additionally characterized by X-ray powder diffraction. Furthermore, in vitro dissolution studies and dynamic compaction analysis were performed on the selected samples of solid dispersions. Among the studied polymers, PVP and HPMC have been identified as polymers with the highest affinity towards CARV, based on the calculated delta(p) values. This has been also confirmed with the highest dissolution efficiency of CARV-PVP and CARV-HPMC solid dispersions. Solid state characterization indicated that CARV was dispersed either molecularly, or in the amorphous form, depending on interactions with each polymer. Determination of CARV-PVP and CARV-HPMC mechanical properties revealed that CARV-PVP solid dispersion has superior compactibility and tabletability. Therefore, CARV-PVP solid dispersion has been highlighted as the most appropriate for the further development of tablets as the final dosage form. Presented study provides an example for efficient approach for development of poorly soluble drug solid dispersion with satisfactory tableting properties.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "International Journal of Pharmaceutics",
title = "Selection of the suitable polymer for supercritical fluid assisted preparation of carvedilol solid dispersions",
pages = "200-190",
volume = "554",
doi = "10.1016/j.ijpharm.2018.11.015",
url = "conv_5739"
}
Đuriš, J., Milovanović, S., Medarević, Đ., Dobričić, V., Dapčević, A.,& Ibrić, S.. (2019). Selection of the suitable polymer for supercritical fluid assisted preparation of carvedilol solid dispersions. in International Journal of Pharmaceutics
Elsevier Science Bv, Amsterdam., 554, 190-200.
https://doi.org/10.1016/j.ijpharm.2018.11.015
conv_5739
Đuriš J, Milovanović S, Medarević Đ, Dobričić V, Dapčević A, Ibrić S. Selection of the suitable polymer for supercritical fluid assisted preparation of carvedilol solid dispersions. in International Journal of Pharmaceutics. 2019;554:190-200.
doi:10.1016/j.ijpharm.2018.11.015
conv_5739 .
Đuriš, Jelena, Milovanović, Stoja, Medarević, Đorđe, Dobričić, Vladimir, Dapčević, Aleksandra, Ibrić, Svetlana, "Selection of the suitable polymer for supercritical fluid assisted preparation of carvedilol solid dispersions" in International Journal of Pharmaceutics, 554 (2019):190-200,
https://doi.org/10.1016/j.ijpharm.2018.11.015 .,
conv_5739 .

DSpace software copyright © 2002-2015  DuraSpace
About TechnoRep | Send Feedback

OpenAIRERCUB
 

 

All of DSpaceInstitutions/communitiesAuthorsTitlesSubjectsThis institutionAuthorsTitlesSubjects

Statistics

View Usage Statistics

DSpace software copyright © 2002-2015  DuraSpace
About TechnoRep | Send Feedback

OpenAIRERCUB