Претраживање
Приказ резултата 701-710 од 736
A coupled thermo-mechanical model of friction stir welding
(Vinca Institute of Nuclear Sciences, 2012)
A coupled thermo-mechanical model was developed to study the temperature fields, the plunge force and the plastic deformations of Al alloy 2024-T351 under different rotating speed: 350, 400, and 450 rpm, during the friction ...
Design of novel multifunctional Oxaprozin delivery system based on dual-sensitive poly(2-hydroxypropyl acrylate/itaconic acid) hydrogels
(Elsevier Science Bv, Amsterdam, 2015)
Series of novel dual-sensitive poly(2-hydroxypropyl acrylate/itaconic acid) hydrogels were designed as multifunctional drug delivery system which can provide several advantages including drug protection, self-regulated ...
Mechanical properties and microstructure of molybdenum coating layers deposited vacuum plasma spray process / Mehanička svojstva i mikrostruktura slojeva prevlake molibdena deponovane vakuum plazma sprej procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
Molybdenum coatings due to their excellent wear resistant properties and sliding characteristics under dry friction conditions are often used in applications to resist friction and dry sliding. Since molybdenum metal is ...
Effect of immobilisation materials on viability and fermentation activity of dairy starter culture in whey-based substrate
(Wiley-Blackwell, Hoboken, 2016)
BACKGROUND: The main objectives of the paper were to study influence of immobilisation of dairy starter culture 'Lactoferm ABY 6' on fermentation and probiotic potential of fermented whey-based substrate. RESULTS: Fermentation ...
Numerical simulation of the plunge stage in friction stir welding / Numerička simulacija faze uranjanja kod zavarivanja trenjem mešanjem
(Society for Structural Integrity and Life, Institute for Material Testing, 2011)
This paper investigates the plunge stage using numerical modeling. A three-dimensional finite element model (FEM) of the plunge stage is developed using the commercial code ABAQUS to study the thermo-mechanical processes ...
Advantage of use of activated flux-cored wire instead of solid wire with the mag welding process from the mechanical properties aspect
(Croatian Metallurgical Soc, Zagreb, 2013)
The objective of this paper is the analysis and evaluation of the quality of the new flux-cored wire designed for the MAG welding process that was developed and produced using special laboratory equipment. Experimental ...
Quality of fermented whey beverage with milk
(Savez hemijskih inženjera, Beograd, 2016)
One of the most economical ways of whey processing is the production of beverages, which represents a single process that exploits all the potential of whey as a raw material. Functional and sensory characteristics of ...
The influence of different supplements on the probiotic character of fermented whey-based beverage / Uticaj različitih dodataka na probiotski karakter fermentisanog napitka na bazi surutke
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2013)
The aim of this study was the selection of appropriate supplements for the probiotic whey-based beverage production by Lactobacillus johnsonii NRRL B-2178. The analysis of the main effects and their interactions was performed ...
Hydrothermal synthesis of TiO2/carbon composites and their application for removal of organic pollutants
(Elsevier, Amsterdam, 2019)
TiO2/carbon composites were synthesized by hydrothermal carbonization, using titanium isopropoxide and glucose precursor solution to obtain composites with Ti/C molar ratios ranging from 0.05 to 0.30. Characterization of ...
Numerical simulation of the plunge stage in friction stir welding alloys EN AW 2024 T 351 and EN AW 7049A T 652 / Numerička simulacija faze probijanja postupka zavarivanja trenjem mešanjem legura EN AW 2024 T 351 i EN AW 7049A T 652
(Univerzitet u Novom Sadu - Fakultet tehničkih nauka - Institut za proizvodno mašinstvo, Novi Sad, 2011)
This paper investigates the plunge stage using numerical modeling. Change of temperature and plunge force have been analyzed during the plunge stage of the FSW procedure for high hardness aluminum alloys EN AW 2024 T 351 ...