Претраживање
Приказ резултата 1-10 од 22
Simultaneity analysis in a wireless sensor network
(Polska Akad Nauk, Polish Acad Sciences, Warszawa, 2015)
An original wireless sensor network for vibration measurements was designed. Its primary purpose is modal analysis of vibrations of large structures. A number of experiments have been performed to evaluate the system, with ...
Poly(methyl methacrylate) denture base materials modified with ditetrahydrofurfuryl itaconate: Significant applicative properties
(Srpsko hemijsko društvo, Beograd, 2015)
The aim of this work was to examine the possibility of modification of commercial denture base materials with itaconic acid esters, in order to obtain materials with lower toxicity and higher biocompatibility. Despite their ...
Photocatalytic Performance of Carbon Monolith/TiO2 Composite
(Hindawi Ltd, London, 2015)
The new and simple approach for deposition of catalytically active TiO2 coating on carbon monolith (CM) carrier was presented. CM photocatalysts were impregnated with TiO2 using titanium solution and thermal treatment, and ...
Differences in the mode of thermomechanical processing between white gold alloys to produce semi-finished products
(Bulgarian Acad Science, Sofia, 2015)
The results of the investigation of the reduction degree on the hardness of a gold sample with chemical composition Au58,5Ag15Cu9,5Ni9Zn5Pd3 for old white gold alloy and Au58,5Ag18Cu10,5Ga8Zn5 (wt %) for new white gold ...
Antibacterial activity of copper-containing clinoptilolite/PVC composites toward clinical isolate of Acinetobacter baumannii
(Srpsko hemijsko društvo, Beograd, 2015)
The multidrug-resistant bacteria Acinetobacter baumannii cause serious hospital infections. Commercial poly(vinyl chloride) (PVC) used for endotracheal tubes was modified in order to obtain a composite with an antibacterial ...
Sorption of cadmium ions from saline waters onto Fe(III)-zeolite / Sorpcija jona kadmijuma iz slanih voda na Fe(III)-zeolitu
(Association of Chemical Engineers of Serbia, 2015)
The sorption of Cd2+ from natural seawater, artificial seawater, distilled water and NaCl solution of the same ionic strength as the seawater onto zeolite modified by iron(III) oxide (Fe(III)-zeolite) was investigated. The ...
Stress corrosion cracking resistance of aluminum alloy 7000 series after two-step aging / Otpornost aluminijumske legure serije 7000 prema naponskoj koroziji posle dvostepenog termičkog taloženja
(Association of the Chemical Engineers of Serbia, 2015)
The effect of one-step and a new (short) two-step aging process on the resistance to stress corrosion cracking of an aluminum alloy 7000 series was investigated, using slow strain rate test and fracture mechanics method. ...
MOL-D: A Collisional Database and Web Service within the Virtual Atomic and Molecular Data Center
(Indian Acad Sciences, Bangalore, 2015)
MOL-D database is a collection of cross-sections and rate coefficients for specific collisional processes and a web service within the Serbian Virtual Observatory (SerVO) and the Virtual Atomic and Molecular Data Center ...
The Mechanical Properties of a Poly(methyl methacrylate) Denture Base Material Modified with Dimethyl Itaconate and Di-n-butyl Itaconate
(Hindawi Ltd, London, 2015)
This study investigates a wide range of clinically relevant mechanical properties of poly(methyl methacrylate) (PMMA) denture base materials modified with di-methyl itaconate (DMI) and di-n-butyl itaconate (DBI) in order ...
The influence of the passive evaporative cooling vest on a chemical industry workers and physiological strain level in hot conditions / Uticaj prsluka za hlađenje sa sistemom pasivnog isparavanja na nivo fiziološkog opterećenja radnika hemijske industrije u toploj sredini
(Association of Chemical Engineers of Serbia, 2015)
The present study was conducted in order to evaluate efficiency of a personal body cooling system based on passive evaporative technologies and its effects on test subjects and their psycho-physiological suitability during ...