Претраживање
Приказ резултата 1-10 од 18
Electrical Resistivity of Plasma Treated Viscose and Cotton Fabrics with Incorporated Metal Ions
(Korean Fiber Soc, Seoul, 2018)
Cellulose fabrics (viscose and cotton) were treated with atmospheric pressure dielectric barrier discharge (DBD) in air. After DBD treatment, samples were characterized and volume electrical resistance was measured under ...
Hydrometallurgical Process for Selective Metals Recovery from Waste-Printed Circuit Boards
(MDPI, Basel, 2018)
This paper presents an experimentally-proved hydrometallurgical process for selective metals recovery from the waste-printed circuit boards (WPCBs) using a combination of conventional and time-saving methods: leaching, ...
Efficient multistep arsenate removal onto magnetite modified fly ash
(Academic Press Ltd- Elsevier Science Ltd, London, 2018)
The modification of the fly ash (FA) by magnetite (M) was performed to obtain FAM adsorbent with improved adsorption efficiency for arsenate removal from water. The novel low cost adsorbents are characterized by liquid ...
Possibility of L-(+)-lactic acid fermentation using malting, brewing, and oil production by-products
(Pergamon-Elsevier Science Ltd, Oxford, 2018)
Industrial by-products such as brewer's spent grain (BSG) hydrolysate, malt rootlets extract (MRE) and soybean meal extract (SME) were used for L-(+) lactic acid (LA) production by a pure L rhamnosus ATCC 7469 strain. The ...
Processing of hybrid wood plastic composite reinforced with short PET fibers
(Taylor & Francis Inc, Philadelphia, 2018)
Poly(ethylene terephthalate) (PET) fibers (virgin, waste, and mixed) were incorporated in the composite poly(methyl methacrylate) (PMMA)-wood. Hybrid composite panels were prepared by pressure molding. Toluene-2,4-diisocyanate ...
Cefazolin-loaded polycaprolactone fibers produced via different electrospinning methods: Characterization, drug release and antibacterial effect
(Elsevier, Amsterdam, 2018)
Antibiotic containing polycaprolactone (PCL) fibers were produced by using three electrospinning methods: blend, emulsion and co-axial electrospinning (labeled as S1, S2 and S3, respectively). The profiles of drug release ...
The innovative combined microwave-assisted and photo-polymerization technique for synthesis of the novel degradable hydroxyethyl (meth)acrylate/gelatin based scaffolds
(Elsevier Science Bv, Amsterdam, 2018)
The discovery of novel biodegradable biomaterials able to support and control cellular activity as well as development of an enhanced and efficient method for their fabrication, are of paramount importance in the field of ...
The implementation of image analysis for the visualization of adhesion assessment of a composite film
(Elsevier Science Bv, Amsterdam, 2018)
The objective of this study is to investigate quantitative assessment of the adhesion behavior of composite films onto a metallic surface. The composite films had UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA ...
Synthesis and characterization of fully bio-based unsaturated polyester resins
(Springer, New York, 2018)
The sustainable tomorrow for future generations lies with the present industrial development toward the proper utilization of various bio-based products. For a transition to a higher level of sustainability, it is necessary ...
Floating Photocatalyst Based on Poly(epsilon-caprolactone) Foam and TiO2 Nanoparticles for Removal of Textile Dyes
(Korean Fiber Soc, Seoul, 2018)
This study discusses a novel approach for fabrication of floating photocatalyst which can be efficiently exploited for photodegradation of dyes in aqueous solutions. A fabrication of the floating photocatalyst consisted ...