Претраживање
Приказ резултата 21-30 од 139
The influence of alumina particle modification on the adhesion of the polyacrylate matrix composite films and the metal substrate
(Taylor & Francis Ltd, Abingdon, 2019)
Adhesion behavior between the composite films, consisting of UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina particles, Al2O3 ...
Impact of Alumina Particles on the Morphology and Mechanics of Hybrid Wood Plastic Composite Materials
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
Hybrid composite panels of Wood-Plastic Composites (WPC) consisting of wood and poly (methyl methacrylate) (PMMA) were reinforced with alumina particles and made by "hot pressing" method. Alumina-based particles were made ...
Dimethyl Itaconate Modified PMMA - Alumina Fillers Composites With Improved Mechanical Properties
(Wiley, Hoboken, 2019)
PMMA poly(methyl methacrylate) has a large spectrum of uses as bone cements, in dentistry as denture base materials and other industrial applications. One of the main drawbacks of these materials is the residual monomer ...
Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites
(Wiley, Hoboken, 2019)
The investigation of the influence of acid/base treatment and addition level of non-metallic fractions (NMFs), obtained by processing of printed circuit boards, on the mechanical properties and shrinkage of unsaturated ...
Enhanced Lactic Acid Production by Adaptive Evolution of Lactobacillus paracasei on Agro-industrial Substrate
(Springer, New York, 2019)
The aim of this study was to perform the adaptation of Lactobacillus paracasei NRRL B-4564 to substrate through adaptive evolution in order to ensure intensive substrate utilization and enhanced L (+)-lactic acid (LA) ...
Synthesis, structural characterization, DFT calculations and antiproliferative evaluation of novel spirohydantoin derivatives containing a substituted benzyl moiety
(Elsevier Science Bv, Amsterdam, 2019)
Two series of cycloalkanespiro-5-hydantoins, namely cyclo-hexanespiro-5-hydantoins and cycloheptanespiro-5-hydantoins with a 4-substituted benzyl or a 2-(4-substituted phenyl)-2-oxoethyl group at N3 position, were synthesized ...
Crude bacterial extracts of two new Streptomyces sp isolates as bio-colorants for textile dyeing
(Springer, Dordrecht, 2014)
Renewed demand for incorporation of natural dyes (bio-colorants) in textile industry could be met through biotechnological production of bacterial pigments. Two new Streptomyces strains (NP2 and NP4) were isolated for the ...
From mycelium to spores: A whole circle of biological potency of mosaic puffball
(Elsevier Science Bv, Amsterdam, 2019)
Methanol extracts of mosaic puffball (Handkea utriformis, Bovistella utriformis, Lycoperdon utriforme, Calvatia utriformis - current name is a subject of debate), from three different stages - mycelium (HUMIC), immature ...
Hydrometallurgical recovery of tin and lead from waste printed circuit boards (wpcbs): limitations and opportunities
(Croatian Metallurgical Soc, Zagreb, 2016)
In this paper, possibility for selective Pb and Sn recovery, using three different solutions of NaOH, HCl and HNO3, from WPCBs containing low concentrations of Pb and Sn is presented. According to obtained results, over ...
Experimental and numerical thermo - mechanical analysis of friction stir welding of high - strength alluminium alloy
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2014)
This paper presents experimental and numerical analysis of the change of temperature and force in the vertical direction during the friction stir welding of high-strength aluminium alloy 2024 T3. This procedure confirmed ...