Претраживање
Приказ резултата 1-10 од 217
Reproductive Behaviour of New European Plum Cultivars ‘Lana’, ‘Divna’ and ‘Petra’
(Springer Science and Business Media Deutschland GmbH, 2023)
The development of European plum (Prunus domestica L.) cultivars is a crucial part of the 70-year-long tradition of breeding work on temperate zone fruit species at the Fruit Research Institute, Čačak, Republic of Serbia. ...
Hydrometallurgical recovery of tin and lead from waste printed circuit boards (wpcbs): limitations and opportunities
(Croatian Metallurgical Soc, Zagreb, 2016)
In this paper, possibility for selective Pb and Sn recovery, using three different solutions of NaOH, HCl and HNO3, from WPCBs containing low concentrations of Pb and Sn is presented. According to obtained results, over ...
Modeling of the Mechanical Behavior of Fiber-Reinforced Ceramic Composites Using Finite Element Method (FEM)
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2014)
Modeling of the mechanical behavior of fiber-reinforced ceramic matrix composites (CMC) is presented by the example of Al2O3 fibers in an alumina based matrix. The starting point of the modeling is a substructure (elementary ...
Flavonoid esters synthesis using novel biocatalytic systems - CAL B immobilized onto LifeTech (TM) ECR supports
(Elsevier B.V., 2020)
In order to enhance productivity and cost-effectiveness of current lipase-catalyzed processes of flavonoid esters synthesis, different LifeTech (TM) ECR carriers varying in functional groups, polarity and porosity were ...
Whey valorization using transgalactosylation activity of immobilized beta-galactosidase
(Wiley, Hoboken, 2019)
Whey represents a significant dairy industry by-product that has recently received due attention based on the rich nutrient composition and significant transformation potential. Hereby, we investigated a possibility of ...
The advantages of using activated flux-cored wire compared to solid wire in the mag welding process from the aspect of metallurgical characteristics
(Croatian Metallurgical Soc, Zagreb, 2014)
This paper analyzes, from the metallurgical aspect, the quality of the new flux-cored wire intended for the MAG welding process in function of changes in shielding gas composition and changes in welding parameters. The ...
Influence of Rapeseed and Sesame Oil on Crystallization and Rheological Properties of Cocoa Cream Fat Phase and Quality of Final Product
(Wiley-Blackwell, Hoboken, 2016)
This research examined spreadable cocoa cream in which fat phase has been modified and analyzed regarding its crystallization and rheological properties and further influence on final product quality. Vegetable fat and ...
The effect of natural modifiers for starch hydrophobization on performance of composite based on ethylene acrylic acid copolymer
(Wiley, Hoboken, 2021)
As a renewable resource, starch is considered to be fully biodegradable and nonpolluting to the environment but the hygroscopicity of starch is the main disadvantage for wider applicability in the production of a polymer-based ...
Heat generation during plunge stage in friction stir welding
(Vinca Institute of Nuclear Sciences, 2013)
This paper deals with the heat generation in the Al alloy Al2024-T3 plate under different rotating speeds and plunge speeds during the plunge stage of friction stir welding. A 3-D finite element model is developed in the ...
Comparison of Mechanical Behavior of SiC Sintered Specimen to Analysis of Surface Defects
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2014)
Silicon carbide is the material that in sintered form is suiTab. for protection from impact as part of the multilayered structure. Its role is to accumulate energy from the projectile, to plastically deform the projectile ...