Претраживање
Приказ резултата 51-60 од 71
Structurally and surface-modified alumina particles as a reinforcement in polyester-based composites with an improved toughness
(Springer, New York, 2020)
Commercial gamma - Al2O3 particles, Al2O3 n, and synthesized Al2O3 doped with iron oxide (Al2O3 Fe) were used as reinforcements to enhance the toughness of an unsaturated polyester resin (UPR). Alumina modification with ...
Origin of the Intrinsic Coercivity Field Variations of ε-Fe2O3
(Russian Journal of Physical Chemistry A, 2019)
ε-Fe2O3 phase is recognized as an attractive material, in both technological and scientific point of view, since it can achieve very high room-temperature coercivity (10–20 kOe). In this paper, multi-phase samples Fe2O3/SiO2 ...
Characterisation of biomedical titanium layers deposited by a vacuum plasma spray process
(Materiali in Tehnologije, 2021)
In this paper we will describe the process of the deposition of thick layers of VPS-Ti coating, which is used as a bonding layer for the upper porous Ti coatings on implant substrates. In order to deposit the powder, we ...
The Project of Serbian Virtual Observatory and Data for Stellar Atmosphere Modeling
(Elsevier B.V., 2009)
We review recent developments in Serbian Virtual Observatory (SerVO) as well as developments surrounding Virtual Atomic and Molecular Data Center. Main components of SerVO are going to be the archive of photographic plates, ...
A Spontaneous Cervical Epidural Hematoma Mimicking a Stroke: A Challenging Case
(Elsevier USA, 2019)
Background: A spontaneous cervical epidural hematoma (SCEH) is a rare occurrence, with < 500 cases reported to date. Clinically, it usually presents with quadriparesis, but in extremely rare cases it can present with ...
CFD analysis of the influence of centrifugal separator geometry modification on the pulverized coal distribution at the burners
(Transactions of Famena, 2014)
This paper presents the results of 3D numerical flow simulation in the ventilation mill (VM) and air mixture channel (AMC) of Kostolac B power plant, where a centrifugal separator with adjustable blade angle is used. ...
Functional fermented whey carrot beverage - qualitative, nutritive and techno-economic analysis
(Ars Docendi, Bucharest, 2018)
The main objectives of the paper were to investigate the possibility of use of carrot juice in the production of functional fermented whey based beverage, to simulate and economically evaluate the production process and ...
Mixed-ligand Mn-II and Cu-II complexes with alternating 2,2 '-bipyrimidine and terephthalate bridges
(International Union of Crystallography, 2015)
The novel polymeric complexes catena-poly[[diaquamanganese(II)]-mu-2,2'-bipyrimidine-kappa N-4(1),N-1':N-3,N-3'-[diaquamanganese(II)]-bis(mu-terephthalato-kappa O-2(1):O-4)], [Mn-2(C8H4O4)(2)(C8H6N4)(H2O)(4)](n), (I), and ...
Experimental Investigation of Microstructure and Phase Transitions in Ag-Cu-Zn Brazing Alloys
(Springer, 2018)
Microstructure and phase transitions of selected brazing alloys from the Ag-Cu-Zn ternary system were investigated. Four ternary alloys with silver content in the compositional range from 25 to 60 wt.% were studied using ...
Influence of surface modification to mechanical and thermal properties of nanomodified acrylic dental resin
(Inst Materials Physics, Bucharest, 2018)
This paper investigated the processing and characterization of dental nanocomposites based on poly(methyl methacrylate) (PMMA) matrix reinforced with zirconium dioxide (ZrO2) nanoparticles were prepared by in-situ free ...