Pretraživanje
Prikaz rezultata 1-7 od 7
Measurement methods for residual stresses in CWR
(20th International Scientific Conference on Energy Management of Municipal Facilities and Sustainable Energy Technologies, EMMFT 2018, 2020)
Continuously welded rails are a part of the track structure since the 1950s. Total stresses in continuously welded rails include residual stresses generated during the manufacturing process as well as the service life of ...
Effect of Electrodeposition Current Density on the Microstructure and Magnetic Properties of Nickel-cobalt-molybdenum Alloy Powders
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2014)
Nanostructured nickel-cobalt-molybdenum alloy powders were electrodeposited from an ammonium sulfate bath. The powders mostly consist of an amorphous phase and a very small amount of nanocrystals with an mean size of less ...
Structure and magnetic properties of electrodeposited Ni87.3Fe11.3W1.4 alloy
(Elsevier, Amsterdam, 2014)
A dark gray nanostructured coating of an alloy composed of 87.3 wt.% Ni, 11.3 wt.% Fe and 1.4 wt.% W (Ni87.3Fe11.3W1.4) was electrodeposited from an ammonia citrate bath on a titanium cathode at a current density of 500 ...
Sorption and dielectric properties of jute woven fabrics: Effect of chemical composition
(Elsevier B.V., 2019)
The jute woven fabric was treated with sodium hydroxide and sodium chlorite under different conditions in order to study the influence of the chemical composition on their sorption and dielectric properties. After the ...
In vitro investigation of electrophoretically deposited bioactive hydroxyapatite/chitosan coatings reinforced by graphene
(Elsevier Science Inc, New York, 2017)
Graphene (Gr) and natural polymer chitosan (CS) were introduced to hydroxyapatite (HAP) to produce a three-component composite coating, which was fabricated by cathodic electrophoretic deposition on Ti substrates in an ...
Methods for determination of residual stress in rail
(Faculty of Mechanical Engineering, Niš, 2018)
The residual stresses in rails are generated during the manufacturing process and have uneven distribution in rail cross section. The residual stress is a part of basic tensile stress in rail foot. For used rail, the ...
Solid state synthesis of extra phase-pure Li4Ti5O12 spinel
(Belgrade : International Institute for the Science of Sintering, 2011)
Extra phase-pure Li4Ti5O12 spinel with particle sizes less than 500 nm was synthesized by solid state reaction of mechanochemicaly activated mixture of nano anatase and Li2CO3 for a very short annealing time, 4 h at 800°C. ...