Претраживање
Приказ резултата 1-10 од 79
Adhesion testing of composites based on Bis-GMA/TEGDMA monomers reinforced with alumina based fillers on brass substrate
(Elsevier Sci Ltd, Oxford, 2018)
Quantitative assessment of the adhesion behavior between the composite film having UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as matrix and the aluminum oxide based ...
A new approach to compatibilization study of EVA/PMMA polymer blend used as an optical fibers adhesive: Mechanical, morphological and thermal properties
(Elsevier Sci Ltd, Oxford, 2018)
Mechanical, morphological and thermal properties of optical fiber adhesives, based on poly(ethylene-co-vinyl acetate) (EVA) with 18 and 40% of vinyl acetate, polymer blend of EVA/poly(methyl methacrylate) (PMMA), and graft ...
The effect of CaO and MgO addition and cooling rate on stability of slag obtained after jarosite and neutral leaching residue treatment in the Waelz process
(Oficyna Wydawnicza Politechniki Wroclawskiej, Wroclaw, 2018)
Jarosite and neutral leaching residue (NLR) are the greatest environmental problems of hydrometallurgical zinc production due to their high quantity and hazardous content. Pyrometallurgical processes, such as the Waelz ...
A new method in designing compatibility and adhesion of EVA/PMMA blend by using EVA-g-PMMA with controlled graft chain length
(Springer, Dordrecht, 2018)
Atom transfer free radical polymerization (ATRP) was employed in a synthesis of graft polymer EVA-g-PMMAwith controlled length of side PMMA chains. Three steps of synthesis: partial hydrolysis of EVA, esterification with ...
Quantitative structure – property relationship studies of liquid chromatography – mass spectrometry responsiveness of aripiprazole and its impurities using artificial neural networks
(Université de LilleFaculté de Pharmecie de Lille, 2018)
The importance of studying electrospray ionization (ESI) technique stems from its widespread liquid
chromatography – mass spectrometry (LC-MS) character, particularly emphasized in scientific areas with most
of non-volatile ...
Izrada softvera i hardvera otvorenog izvora i konstrukcija pH-stat uređaja za primenu u tehnološkom procesu TEMPO-oksidacije celuloze
(2018)
Predstavljeno tehničko rešenje se odnosi na konstrukciju pouzdanog pH-stat uređaja korišćenjem „OpenPhControl“ softvera, hardvera niske cene (peristaltičke i špric pumpe, Arduina, step motora...), komponenata štampanih na ...
Electrical Resistivity of Plasma Treated Viscose and Cotton Fabrics with Incorporated Metal Ions
(Korean Fiber Soc, Seoul, 2018)
Cellulose fabrics (viscose and cotton) were treated with atmospheric pressure dielectric barrier discharge (DBD) in air. After DBD treatment, samples were characterized and volume electrical resistance was measured under ...
Experimental Investigation of Microstructure and Phase Transitions in Ag-Cu-Zn Brazing Alloys
(Springer, 2018)
Microstructure and phase transitions of selected brazing alloys from the Ag-Cu-Zn ternary system were investigated. Four ternary alloys with silver content in the compositional range from 25 to 60 wt.% were studied using ...
Surface cleaning of raw cotton fibers with atmospheric pressure air plasma
(Springer, Dordrecht, 2018)
In this work, a possibility to use atmospheric pressure plasma treatment to clean cotton fibers surface was investigated. Dielectric barrier discharge (DBD) operating in air was used as plasma source. After plasma treatment, ...
Functional fermented whey carrot beverage - qualitative, nutritive and techno-economic analysis
(Ars Docendi, Bucharest, 2018)
The main objectives of the paper were to investigate the possibility of use of carrot juice in the production of functional fermented whey based beverage, to simulate and economically evaluate the production process and ...