Search
Now showing items 1-10 of 512
Immobilization of Aspergillus Niger cellulase onto Lifetech TM carriers and its application in the hydrolysis of sunflower seed meal lignocellulosic fraction / Imobilizacija Aspergillus Niger celulaze na Lifetech TM nosače i primena u reakciji hidrolize lignocelulozne frakcije suncokretove sačme
(Institute for Food Technology, Novi Sad, 2019)
Cellulases are enzymes which catalyse cellulose hydrolysis and are widely used in various industry branches. Lately, their application in treatment of different agroindustrial waste materials which could serve for fuel ...
A study of the photocatalytic degradation of the textile dye CI Basic Yellow 28 in water using a P160 TiO2-based catalyst / Proučavanje fotokatalitičke degradacije tekstilne boje CI Basic Yellow 28 u vodi koristeći P160 katalizator na bazi TiO2
(Serbian Chemical Society, Belgrade, 2012)
The photocatalytic degradation of the synthetic textile dye CI Basic Yellow 28 (BY28) in water, using a recently synthesized P160 TiO2-based catalyst, under Osram ultra-vitalux® lamp (300 W) light, was studied. The effects ...
Measurement of Sleepers Vibrations and Determination of Their Dynamic Deflection and Train Velocity / Merenje vibracija pružnih pragova i određivanje njihovog dinamičkog ugiba i brzine vozova
(Elektrotehnički fakultet, Istočno Sarajevo, 2014)
Structural, spectral and thermal properties of 2-(2-pyridylamino)pyridinium trihydrogen pyromellitate / Структурна, спектрална и термичка својства 2-(2-пиридиламино)пиридиниjум-трихидрогенпиромелитата
(Srpsko hemijsko društvo, 2014)
The title compound, (Hdipya)(H(3)pyr), where Hdipya is protonated 2,2'-dipyridilamine and H(3)pyr is the monoanion of pyromellitic acid (H(4)pyr), was obtained from a reaction mixture containing Zn(II) ions, dipya, Na(4)pyr ...
Optimization of the ball mill processing parameters in the fat filling production
(Savez hemijskih inženjera, Beograd, 2017)
The aim of this study was to determine the effect of the main milling variables, i.e., agitator shaft speed (50, 75 and 100%, which is 25, 37.5 and 50 rpm) and milling time (30, 45 and 60 min) on physical and sensory ...
Formation of a large-area monolayer of polystyrene film via the spin-coating method
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2018)
The self-assembly methods, an inexpensive and high throughput technique capable of producing nanostructure arrays, relies on the formation on a monolayer of self-assembled nanospheres. This paper reports on the formation ...
Lossless Compression of Vibration Signals on an Embedded Device Using a TDE Based Predictor
(Kaunas Univ Technology, Kaunas, 2016)
A lossless compression scheme for the data acquired from three-axial microelectromechanical (MEMS) accelerometer is presented. Time delay estimation (TDE) was applied in conjunction with differential pulse code modulation ...
Razvoj procesa završnog tretmana čvrstih i tečnih zagađujućih materija primenom principa čistije proizvodnje / Development of final treatment processses for solid and liquid pollutants by cleaner production principles application
(Univerzitet u Beogradu, Tehnološko-metalurški fakultet, 2019)
The main goal of the research conducted within this doctoral dissertation was final treatment processes development for solid and liquid pollutants applying cleaner production principles. Aiming to prevent pollution and ...
Ultrasonic assisted arsenate adsorption on solvothermally synthesized calcite modified by goethite, alpha-MnO2 and goethite/alpha-MnO2
(Elsevier, Amsterdam, 2014)
A highly porous calcium carbonate (calcite; sorbent 1) was used as a support for modification with alpha-FeOOH (calcite/goethite; sorbent 2), alpha-MnO2 (calcite/alpha-MnO2; sorbent 3) and alpha-FeOOH/alpha-MnO2 ...
Impermeable layers in landfill design / Prilog projektovanju vodonepropusnih slojeva deponija
(Association of Chemical Engineers of Serbia, 2013)
Landfills are complex systems that could potentially contaminate the environment. This needs to be prevented by providing impermeability during the landfill design. In this aim, the related regulations should be followed ...