Претраживање
Приказ резултата 31-40 од 57
Immobilization of peroxidase from fresh horseradish extract for anthraquinone dye decolorization / Imobilizacija peroksidaze iz svežeg ekstrakta rena i primena u dekolorizaciji antrahinonskih boja
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Synthetic dyes are used in all sectors of industry and represent a serious ecological problem. By the presence, anthraquinone dyes are right after the azo dyes. Unlike azo, anthraquinone dyes are considerably harder to ...
Influence of the Fe(III): Modified clinoptilolite on phosphorus leaching from different soil types / Uticaj Fe(III)- modifikovanog klinoptilolita na izluživanje fosfora iz različitih vrsta zemljišta
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Influence of the iron(III)-modified clinoptilolite (FeCLI) on phosphorus leaching from two different Norwegian soil types (sand and clay loam soil) was studied using a column system at room temperature. FeCLI was used in ...
Inventive level as a basis for the assessment of scientific contribution of inventors / Inventivni nivo pronalaska kao osnov za procenu naučnog doprinosa pronalazača
(University of Belgrade - Faculty of Mechanical Engineering, Belgrade, 2019)
The history of invention reveals that the most important inventions were derived from experiments by which their authors contributed to the discovery of previously unknown natural phenomena. So the question arises as to ...
Tensile strength properties of hybrid magnetic composite materials / Zatezna čvrstoća hibridnih magnetnih kompozitnih materijala
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
The Nd-Fe-B-barium ferrite hybrid composite materials with epoxy matrix presented in this paper cover maximum energy product from 1 to 13 MGOe. Mixture of magnetic particles is responsible for high magnetic quality, while ...
Structural properties of carbon microspheres obtained by hydrothermal treatment of fructose / Strukturne osobine mikrosfera ugljenika dobijenih hidrotermičkim tretmanom fruktoze
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
A carbon-rich solid product has been synthesized by hydrothermal treatment from fructose with HNO3 at temperature of 140°C. The concentration of the precursor was changed in order to investigate how its change influences ...
Graphene reinforced hydroxyapatite biocomposite coatings obtained by electrophoretic deposition on titanium / Biokompozitne prevlake hidroksiapatita ojačane grafenom, dobijene elektroforetskim taloženjem na titanu
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Fast ongoing research of graphene-based nanomaterials reveals that their exceptional properties could be utized for biomedical applications, especially in tissue engineering and drug delivery. Here, we summarized the results ...
Characterisation of the nanotubular oxide layer formed on the ultrafine-grained titanium
(Savez inženjera metalurgije Srbije, Beograd, 2018)
Commercially pure titanium (cpTi) and titanium alloys are metallic implant materials usually used in dentistry and orthopaedics. In order to improve implant properties, Ti-based materials may be surface modified by different ...
Characterization of tantalum coatings deposited using vacuum plasma spray process / Karakterizacija tantal prevlake deponovane vakuum plazma sprej procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Tantalum is a very popular material for the industry as a whole because of very important characteristics such as: high melting point, significant thermal and electrical conductivity, high toughness and resistance to ...
Mechanical and structural features of Nb coating layers deposited on steel substrates in a vacuum chamber / Mehaničke i strukturne karakteristike slojeva prevlake Nb deponovane u vakuumu
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
In this paper analyzed was the influence of implementation of inert Ar gas and a mixture of inert plasma Ar / He gases in a vacuum chamber on the deposition of reactive niobium (Nb) powder. The aim of this paper was to ...
Optimizing the thermal gradient and the pulling speed in a thermoplastic pultrusion process of pet/e glass fibers using finite element method
(Savez inženjera metalurgije Srbije, Beograd, 2018)
A thermoplastic pultrusion process was examined using commercial fiber roving of PET/E glass, to determine the optimum pulling speed and optimal zonal temperatures. Finite element analysis predicted heat transfer through ...