Претраживање
Приказ резултата 61-70 од 86
CdS quantum dots sensitized TiO2 nanotubes by matrix assisted pulsed laser evaporation method
(Elsevier Sci Ltd, Oxford, 2016)
Within this study a matrix assisted pulsed laser evaporation technique was employed for deposition of CdS quantum dots onto TiO2 nanotubes. The number of laser pulses and laser fluence were varied to control the amount of ...
Absorption boost of TiO2 nanotubes by doping with N and sensitization with CdS quantum dots
(Elsevier Sci Ltd, Oxford, 2017)
A process of obtaining N-doped TiO2 nanotubes sensitized by CdS nanoparticles is presented, including detailed characterizations performed along the synthesis. Transparent TiO2 films consisting of nanotubes, 2.5 mu m long ...
Waste animal fats as feedstocks for biodiesel production
(Pergamon-Elsevier Science Ltd, Oxford, 2014)
Biodiesel, an alternate and ecologically acceptable substitute for the conventional fuel, is usually produced from a wide range of edible vegetable oils, which are normally used for human consumption and whose prices are ...
In situ synthesis of Cu/Cu2O nanoparticles on the TEMPO oxidized cotton fabrics
(Springer, Dordrecht, 2018)
In situ synthesis of Cu/Cu2O nanoparticles on the cotton fabric discussed in this study relies on adsorption of Cu2+-ions by carboxylate groups generated through the TEMPO-mediated oxidation of cellulose and their subsequent ...
Trends in Encapsulation Technologies for Delivery of Food Bioactive Compounds
(Springer, New York, 2015)
The food industry expects increasingly complex properties (such as delayed release, stability, thermal protection, and suitable sensorial profile) from food ingredients, which often would not be able to be achieved without ...
Nanomechanical and anti-stabbing properties of Kolon fabric composites reinforced with hybrid nanoparticles
(Elsevier Sci Ltd, Oxford, 2017)
In this study carbon nanotubes (CNT) and silica nanoparticles (SiO2) were added to enhance the dynamic mechanical and anti-stabbing properties of the polyurethaneip-aramid multiaxial fabric (Kolon fabric) composites for ...
New composites based on waste PET and non-metallic fraction from waste printed circuit boards: Mechanical and thermal properties
(Elsevier Sci Ltd, Oxford, 2017)
Influence of the addition of three different non-metallic fractions (NMF), obtained by processing of printed circuit boards (PCBs), on the mechanical and thermal properties of unsaturated polyester resin (UPR) based ...
Ultrasonic assisted arsenate adsorption on solvothermally synthesized calcite modified by goethite, alpha-MnO2 and goethite/alpha-MnO2
(Elsevier, Amsterdam, 2014)
A highly porous calcium carbonate (calcite; sorbent 1) was used as a support for modification with alpha-FeOOH (calcite/goethite; sorbent 2), alpha-MnO2 (calcite/alpha-MnO2; sorbent 3) and alpha-FeOOH/alpha-MnO2 ...
The kinetics of hydrogen absorption/desorption within nanostructured composite Ni79.1Co18.6Cu2.3 alloy using resistometry
(Elsevier Science Sa, Lausanne, 2013)
Ni79.1Co18.6Cu2.3 powder was obtained by electrochemical deposition from an ammonium sulfate bath. The structure and surface morphology of the powder were detected by X-ray diffraction (XRD) and scanning electron microscopy ...
Poly(methacrylic acid) based hydrogels as sorbents for removal of cationic dye basic yellow 28: Kinetics, equilibrium study and image analysis
(Elsevier Science Sa, Lausanne, 2013)
Poly(methacrylic acid) based hydrogels with neutralization degree of monomer of 0% (PMAA/0) and 80% (PMAA/80) were synthesized and their sorption potentials toward model cationic dye, basic yellow 28 (BY28), from aqueous ...