Pretraživanje
Prikaz rezultata 31-40 od 991
Removal of copper(II) ion from aqueous solution by high-porosity activated carbon
(Water Research Commission, Pretoria, 2013)
The removal of copper(II) ion from aqueous solution by the granular activated carbon, obtained from hazelnut shells (ACHS) (Corylus avellana L. var. lunga istriana), was investigated. The ACHS was prepared from ground dried ...
Synthesis and characterization of silver/poly(N-vinyl-2-pyrrolidone) hydrogel nanocomposite obtained by in situ radiolytic method
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
This work describes radiolytic synthesis of silver nanoparticles (Ag NPs) within the poly(N-vinyl-2-pyrrolidone) (PVP) hydrogel. The hydrogel matrix was obtained by gamma irradiation-induced cross-linking, while the in ...
The formation of oxide nanoparticles on the surface of natural clinoptilolite
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
Nanoparticles of NiO, ZnO and Cu(2)O crystallize when the Ni-, Zn- and Cu-exchanged natural clinoptilolite, respectively, are dehydrated by heating in air at 550 degrees C. The dehydration of Mn-exchanged clinoptilolite ...
Simultaneity analysis in a wireless sensor network
(Polska Akad Nauk, Polish Acad Sciences, Warszawa, 2015)
An original wireless sensor network for vibration measurements was designed. Its primary purpose is modal analysis of vibrations of large structures. A number of experiments have been performed to evaluate the system, with ...
Controlled production of alginate nanocomposites with incorporated silver nanoparticles aimed for biomedical applications / Kontrolisano dobijanje alginatnih nanokompozita sa inkorporisanim nanočesticama srebra u cilju biomedicinske primene
(Serbian Chemical Society, Belgrade, 2012)
The production of nanocomposite alginate microbeads with electrochemically synthesized silver nanoparticles (AgNPs) based on the electrostatic extrusion technique was investigated with respect to their potentials for ...
Influence of picosecond laser pulses on the microstructure of austenitic materials
(Springer, New York, 2011)
We investigate samples of austenitic materials - stainless steel and iron-based superalloy - which are widely used at high temperatures and pressures. The samples were exposed to Nd(3+):YAG laser pulses with a wavelength ...
Naponska korozija metala i legura i njihovih zavarenih spojeva, Deo II: metode ispitivanja
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, Srbija, 2012)
U radu su razmotrene metode ispitivanja naponske korozije metala i legura i njihovih zavarenih spojeva. Opisani su
principi tih metoda, postupci izvođenja, oblasti primene, kao i prednosti i nedostaci pojedinih metoda. ...
Adsorption of azo dyes on polymer materials / Adsorpcija azo boja na polimernim materijalima
(Association of Chemical Engineers of Serbia, 2013)
The use of polymeric adsorbents for the removal of azo dyes from solution has been reviewed. Adsorption techniques are widely used to remove certain classes of pollutants from waters, especially those which are not easily ...
Conceptual design for treatment of mining and metallurgical wastewaters which contains arsenic and antimony
(Association of Metallurgical Engineers of Serbia, 2012)
This paper presents a preliminary design for treatment of mining and metallurgical wastewaters (MMW) from the basin of antimony 'Zajača', which contains high concentrations of arsenic and antimony. MMW have been investigated ...
Removal of textile dyes from water by TiO2 nanoparticles immobilized on poly(epsilon-caprolactone) beads and foams
(Srpsko hemijsko društvo, Beograd, 2018)