Претраживање
Приказ резултата 1-10 од 32
The analysis of forming PVB-SiO2 nanocomposite fibers by the electrospinning process / Analiza formiranja PVB-SiO2 nanokompozitnih vlakana pomoću elektrospining procesa
(Vojnotehnički institut, Beograd, 2011)
The poly (vinyl butyral)-silica (PVB-SiO2) nanofibers were obtained by the electrospinning process. The experiments were carried out with PVB solution in concentration of 10 wt.% where ethanol was used as the solvent. The ...
Novel hydrogel nanocomposites based on alginate and silver nanoparticles
(24th European Conference on Biomaterials, EBS 2011, 2011)
Biomechanical properties of alginate hydrogels in a biomimetic bioreactor for cartilage tissue engineering
(24th European Conference on Biomaterials, EBS 2011, 2011)
The formation of oxide nanoparticles on the surface of natural clinoptilolite
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
Nanoparticles of NiO, ZnO and Cu(2)O crystallize when the Ni-, Zn- and Cu-exchanged natural clinoptilolite, respectively, are dehydrated by heating in air at 550 degrees C. The dehydration of Mn-exchanged clinoptilolite ...
Synthesis and characterization of silver/poly(N-vinyl-2-pyrrolidone) hydrogel nanocomposite obtained by in situ radiolytic method
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
This work describes radiolytic synthesis of silver nanoparticles (Ag NPs) within the poly(N-vinyl-2-pyrrolidone) (PVP) hydrogel. The hydrogel matrix was obtained by gamma irradiation-induced cross-linking, while the in ...
Structural and mechanical properties of different hard welded coatings for impact plate for ventilation mill
(SUDURA Publishing House, 2011)
Distribution of loads of cycloid speed reducer
(University of Timisoara, Transactions on Mechanics, 2011)
Cycloidal speed reducer belongs to the generation of modern planetary gears. It main features are:
high transmission ratio, compact design, long and reliable working life, high efficiency, possibility of accepting
big ...
Influence of Microwave Heating on the Polymerization Kinetics and Application Properties of the PMMA Dental Materials
(Wiley, Hoboken, 2011)
The effects of heating mode (conventional isothermal heating (CIH) and microwave isothermal heating (MWIH) on the kinetics of polymerization and the properties important for the application (residual monomer, hardness, and ...
Application of electrochemical methods for the investigation of intergranular corrosion of welded joint of austenitic stainless steel 19cr-9ni
(Savez hemijskih inženjera, Beograd, 2011)
The sensitization degree of austenitic stainless steel welded joints was investigated by electrochemical methods of the double loop electrochemical potentiokinetic reactivation (DL EPR) in H(2)SO(4) + KSCN solution, and ...
A study of the removal of copper ions from aqueous solution using clinoptilolite from Serbia
(Springer, New York, 2011)
Toxic metal contamination of waste waters can be mitigated by metal adsorption to clay and zeolitic minerals, but in developing countries such environmental remediation can be cost prohibitive if these minerals are not ...