Претраживање
Приказ резултата 61-67 од 67
Corrosion Testing of an Al-Zn-Mg-Cu Alloy After Different Heat Treatment Regimes by the Application of Electrochemical Methods
(Military Technical Institute, 2012)
Abstract: The corrosion tendency in the 7000 series aluminium alloys changes depending on the content of alloying
elements, thermal and thermo-mechanical treatments, etc. An alloy of this type applied in the production ...
Reparation of Steel Construction of Vehicle-mounted Self-propelled Crane's Telescopic Boom
(University of Belgrade, Faculty of Mechanical Engineering, Srbija, 2012)
In this paper it is presented reparation of steel construction of selfpropelled
crane telescopic boom by welding. By doing visual inspection of
self-propelled crane, it is noticed numerous cracks and deformations at ...
Using the numerical simulations and comparative diagnostic methods to optimize the product
(The Bulletin of the National R&D Institute for Welding and Material Testing - ISIM Timişoara, Romania, 2012)
Serbian Virtual Observatory 2010-2012 and its Connection with Virtual Atomic and Molecular Data Center (VAMDC)
(Serbian Astronomical SocietyAstronomical Observatory Belgrade, 2012)
In this lecture we will review the progress in the developments in Serbian
Virtual Observatory (SerVO) within 2010-2012 period, as well as its relation
with the European FP7 project: Virtual Atomic and Molecular Data ...
A coupled thermo-mechanical model of friction stir welding
(Vinca Institute of Nuclear Sciences, 2012)
A coupled thermo-mechanical model was developed to study the temperature fields, the plunge force and the plastic deformations of Al alloy 2024-T351 under different rotating speed: 350, 400, and 450 rpm, during the friction ...
Friction-stir welding of high-strength aluminium alloys and a numerical simulation of the plunge stage
(Institute of Metals and Technology, 2012)
This paper defines a set of welding parameters for the Friction-Stir Welding (FSW) of two forged panels of the alloy EN AW 7049A in a T652 temper and discusses the plunge stage of FSW using numerical modeling. This ...
Serbian Virtual Observatory
(ACM Press, 2012)
The work on SerVO - Serbian virtual observatory (http://servo.aob.rs/) started in 2008, with aims: 1) To establish SerVO and join the EuroVO - European Virtual Observatory and IVOA - Inetrnational Virtual Observatory ...