Претраживање
Приказ резултата 31-40 од 81
Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors
(Elsevier Sci Ltd, Oxford, 2015)
The effects of common precursors used in the synthesis of CeO2 nanopowders were investigated, and the structural and spectral properties of the resulting products were compared. Two cerium (III) salts, i.e., Ce(NO3)(3)center ...
Modelling current efficiency in an electrochemical hypochlorite reactor
(Elsevier, Amsterdam, 2015)
A mathematical model was set up for anodic, cathodic and overall current efficiencies of an electrochemical cell for hypochlorite production acting as an ideal stirred reactor. A 0.06-0.20 mol dm(-3) NaClO hypochlorite ...
Development of an Environmentally Acceptable Detergent Formulation for Fatty Soils Based on the Lipase from the Indigenous Extremophile Pseudomonas aeruginosa Strain
(Wiley, Hoboken, 2015)
A lipase derived from an indigenous extremophile Pseudomonas aeruginosa strain isolated from rancid metalworking fluid was evaluated as a detergent additive. Applicability of the obtained enzyme as an additive in detergent ...
Dynamic Mechanical and Impact Properties of Composites Reinforced with Carbon Nanotubes
(Korean Fiber Soc, Seoul, 2015)
This study presents dynamic mechanical and impact properties of the new form of hybrid thermoplastic composites. The six composites of polyurethane/p-aramid multiaxial fabric forms (Kolon fabrics) were impregnated with 10 ...
Immobilization of peroxidase from fresh horseradish extract for anthraquinone dye decolorization / Imobilizacija peroksidaze iz svežeg ekstrakta rena i primena u dekolorizaciji antrahinonskih boja
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
Synthetic dyes are used in all sectors of industry and represent a serious ecological problem. By the presence, anthraquinone dyes are right after the azo dyes. Unlike azo, anthraquinone dyes are considerably harder to ...
Picosecond laser shock peening of base Nimonic 263 material and laser welded Nimonic 263 alloy / Mehanička obrada pikosekundnim laserom osnovnog materijala i zavarenih spojeva legure Nimonik 263
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2015)
Laser welding is a welding process with a high energy density and numerous advantages over conventional welding methods (narrow heat affected zone, lower heat input, less distortion, and the like.) Mechanical treatment ...
Optimisation of microwave-assisted extraction parameters for antioxidants from waste Achillea millefolium dust
(Elsevier Science Bv, Amsterdam, 2015)
Microwave-assisted extraction of polyphenols and flavonoids from waste Achillea millefolium (yarrow) dust was optimised using the response surface methodology. The influence of the extraction time (13-47 s), ethanol ...
Graphene-based antibacterial composite coatings electrodeposited on titanium for biomedical applications
(Elsevier Science Sa, Lausanne, 2015)
The graphene based silver/hydroxyapatite/graphene (Ag/HAP/Gr) composite coatings were produced by electrophoretic deposition (EPD) on titanium to assemble porous bioactive homogenous coatings, with improved corrosion ...
In vitro conservation of cherry rootstock Gisela 5
(Natl Inst Science Communication-Niscair, New Delhi, 2015)
The paper presents results of the application of 'Cold Storage' (CS), a very simple in vitro technique preservation of cultures at +5 degrees C in total darkness. A protocol has been developed for in vitro preservation of ...
In vitro micropropagation of fruits: Economic efficiency of application / Razmnožavanje voćaka mikropropagacijom in vitro - ekonomska efikasnost primene
(Naučno voćarsko društvo Srbije, Čačak, 2015)
Aspects of rationalization and the introduction of so-called ‘low cost’ technology of micropropagation and wider applicability for commercial purposes in the field of pomology, were investigated in this paper. The application ...