Search
Now showing items 11-20 of 109
Poly(methyl methacrylate) denture base materials modified with ditetrahydrofurfuryl itaconate: Significant applicative properties
(Srpsko hemijsko društvo, Beograd, 2015)
The aim of this work was to examine the possibility of modification of commercial denture base materials with itaconic acid esters, in order to obtain materials with lower toxicity and higher biocompatibility. Despite their ...
Photocatalytic Performance of Carbon Monolith/TiO2 Composite
(Hindawi Ltd, London, 2015)
The new and simple approach for deposition of catalytically active TiO2 coating on carbon monolith (CM) carrier was presented. CM photocatalysts were impregnated with TiO2 using titanium solution and thermal treatment, and ...
Differences in the mode of thermomechanical processing between white gold alloys to produce semi-finished products
(Bulgarian Acad Science, Sofia, 2015)
The results of the investigation of the reduction degree on the hardness of a gold sample with chemical composition Au58,5Ag15Cu9,5Ni9Zn5Pd3 for old white gold alloy and Au58,5Ag18Cu10,5Ga8Zn5 (wt %) for new white gold ...
Ni-pd/al(2)o(3) catalyst supported on reticulated ceramic foam for dry methane reforming
(Savez inženjera metalurgije Srbije, Beograd, 2015)
In the present study, Ni-Pd/Al2O3 catalyst supported on alpha-Al2O3 based foam was prepared and evaluated in the dry methane reforming process. Corresponding metal chlorides were deposited to the foam surface by impregnation ...
Investigation of electrochemical behavior of anisomycin on gold electrode followed by HPLC-MS/MS analysis
(Elsevier Science Inc, New York, 2015)
Anisomycin is an immunosuppressant in low doses ( lt 0.1 mu M) with possible application in treatment of some autoimmune diseases and in inhibiting transplantation rejection. Anisomycin suppresses malignant tumor cell ...
High performance alkyd resins synthesized from postconsumer PET bottles
(Royal Soc Chemistry, Cambridge, 2015)
The glycolytic recycling of waste PET presents a challenge for the production of secondary value-added products, such as alkyd resins. A way to overcome the unsatisfactory mechanical, drying and chemical resistance properties ...
Evaluation of poly(hydroxyethyl acrylate/itaconic acid) hydrogels for controlled delivery of transition metal complexes with Oxaprozin as potential antiproliferative agents
(Springer, New York, 2015)
A series of dual-sensitive poly(2-hydroxyethyl acrylate/itaconic acid) (P(HEA/IA)) hydrogels were synthesized and evaluated as drug delivery systems for potential antiproliferative agents. Investigated hydrophobic compounds, ...
Antibacterial activity of copper-containing clinoptilolite/PVC composites toward clinical isolate of Acinetobacter baumannii
(Srpsko hemijsko društvo, Beograd, 2015)
The multidrug-resistant bacteria Acinetobacter baumannii cause serious hospital infections. Commercial poly(vinyl chloride) (PVC) used for endotracheal tubes was modified in order to obtain a composite with an antibacterial ...
Bioactive hydroxyapatite/graphene composite coating and its corrosion stability in simulated body fluid
(Elsevier Science Sa, Lausanne, 2015)
The hydroxyapatite/graphene (HAP/Gr) composite was electrodeposited on Ti using the electrophoretic deposition process to obtain uniform bioactive coating with improved mechanical strength and favorable corrosion stability ...
Oxaprozin/poly(2-hydroxyethyl acrylate/itaconic acid) hydrogels: morphological, thermal, swelling, drug release and antibacterial properties
(Springer, New York, 2015)
In this study, a series of novel stimuli-sensitive hydrogels based on 2-hydroxyethyl acrylate and itaconic acid monomers were designed for the controlled release of hydrophobic drug, Oxaprozin. All samples were synthesized ...