Претраживање
Приказ резултата 51-60 од 129
Doping of TiO2 nanotubes with nitrogen by annealing in ammonia for visible light activation: Influence of pre- and post-annealing in air
(Elsevier Science Sa, Lausanne, 2019)
The similar to 60 nm wide and similar to 2 mu m long TiO2 nanotubes were obtained by anodization of Ti films sputtered on F-doped tin oxide glass. For N-doping the samples were annealed in ammonia atmosphere. The effect ...
The influence of alumina particle modification on the adhesion of the polyacrylate matrix composite films and the metal substrate
(Taylor & Francis Ltd, Abingdon, 2019)
Adhesion behavior between the composite films, consisting of UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as a matrix and the ferrous oxide doped alumina particles, Al2O3 ...
The influence of short thermal treatment on structure, morphology and optical properties of Er and Pr doped ceria pigments: Comparative study
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2019)
Potential non-toxic pink and red ceramic pigments based on CeO2 were successfully synthesized by self-propagating room temperature method and thermally treated at 600, 900 and 1200 degrees C for 15 min. The structure, ...
Effects of caraway and juniper essential oils on aflatoxigenic fungi growth and aflatoxins secretion in polenta
(Wiley, Hoboken, 2019)
Inhibitory activity of caraway and juniper essential oils was tested against two aflatoxigenic strains (Aspergillus flavus-four isolates and Aspergillus parasiticus-one isolate) using the method of agar plates. A. flavus ...
Photocatalytic Degradation of Bisphenol A with alpha-Fe2O3 Fibers and Particles
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
Two-step synthesis of Fe2O3 particles, performed by precipitation from iron(III) chloride (FeCl3 center dot 6H(2)O) using ammonium hydroxide in first step and calcination at 400 and 700 degrees C during 4 h, provided Fe2O3 ...
Synthesis and characterization of nanocrystalline polyhedral oligo silsesquioxanes (POSS) with cross-linkable functionalities
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
A facile synthesis was employed for three polyhedral oligo silsequioxanes (POSS), obtaining incompletely condensed structures with fern-like and cubic morphologies. Proton nuclear magnetic resonance spectroscopy (H-1 NMR) ...
Recyclability of technology metals from E-waste: Case study of in and Ga recovery from magnetic fraction
(Association of Metallurgical Engineers of Serbia, 2019)
This study presents the results of the theoretical assessment and a preliminary experimental investigation of technology metals (TM) recovery from magnetic fraction obtained after mechanical treatment of waste printed ...
Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites
(Wiley, Hoboken, 2019)
The investigation of the influence of acid/base treatment and addition level of non-metallic fractions (NMFs), obtained by processing of printed circuit boards, on the mechanical properties and shrinkage of unsaturated ...
Impact of Alumina Particles on the Morphology and Mechanics of Hybrid Wood Plastic Composite Materials
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
Hybrid composite panels of Wood-Plastic Composites (WPC) consisting of wood and poly (methyl methacrylate) (PMMA) were reinforced with alumina particles and made by "hot pressing" method. Alumina-based particles were made ...
Arsenic removal by copper-impregnated natural mineral tufa part II: a kinetics and column adsorption study
(Springer Heidelberg, Heidelberg, 2019)
This batch and column kinetics study of arsenic removal utilized copper-impregnated natural mineral tufa (T-Cu(A-C)) under three ranges of particle size. Non-competitive kinetic data fitted by the Weber-Morris model and ...