Pretraživanje
Prikaz rezultata 1-10 od 87
Defining the ideality of the protective masks by the mathematical modeling method / Određivanje idealnosti zaštitnih maski metodom matematičkog modelovanja
(University of Belgrade - Faculty of Mechanical Engineering, Belgrade, 2019)
Technical contradiction occurs when the system improves one parameter, which automatically causes the deterioration of some of its other parameters. In such a situation, instead of usual acceptance of the optimization of ...
Statistical modeling and optimization of ultrasound-assisted biodiesel production using various experimental designs / Statističko modelovanje i optimizacija proizvodnje biodizela u prisustvu ultrazvuka primenom različitih eksperimentalnih planova
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
The present study compares the performances of the regression models developed by the response surface methodology combined with the full factorial, Box-Behnken or face central composite designs applied for the ultrasound-assisted ...
The influence of Mg and Mn content on abnormal grain growth in AA5182 type alloys
(Savez inženjera metalurgije Srbije, Beograd, 2019)
The occurrence of abnormal grain growth (AGG) in AA5182 alloy during annealing imposes severe restrictions on processing parameters and deteriorates mechanical properties. In this work, we investigated the effect of chemical ...
Removal of emerging pathogenic bacteria using metal-exchanged natural zeolite bead filter
(Iwa Publishing, London, 2019)
Hospital wastewaters can become a route for dissemination of antibiotic-resistant bacteria to the environment if not properly treated. Some of these bacteria are able to survive conventional disinfection treatments (e.g. ...
Supercritical co2 impregnation of gelatin-chitosan films with clove essential oil and characterization thereof
(Savez hemijskih inženjera, Beograd, 2019)
Supercritical CO2 impregnation process was used for the first time to fabricate biodegradable gelatin-chitosan (G/Ch) films containing dove oil (CO) for potential use in active food packaging. All the impregnations were ...
The influence of synthesis conditions on the redox behaviour of LiFePO4 in aqueous solution
(Elsevier Science Sa, Lausanne, 2019)
To contribute to the knowledge on the influence of synthesis procedure on the intercalation kinetics of lithium ions into phospho-olivines, LiFePO4/C composite samples (LFPC) were synthesized in two ways, the first one in ...
The influence of short thermal treatment on structure, morphology and optical properties of Er and Pr doped ceria pigments: Comparative study
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2019)
Potential non-toxic pink and red ceramic pigments based on CeO2 were successfully synthesized by self-propagating room temperature method and thermally treated at 600, 900 and 1200 degrees C for 15 min. The structure, ...
Photocatalytic Degradation of Bisphenol A with alpha-Fe2O3 Fibers and Particles
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
Two-step synthesis of Fe2O3 particles, performed by precipitation from iron(III) chloride (FeCl3 center dot 6H(2)O) using ammonium hydroxide in first step and calcination at 400 and 700 degrees C during 4 h, provided Fe2O3 ...
Recyclability of technology metals from E-waste: Case study of in and Ga recovery from magnetic fraction
(Association of Metallurgical Engineers of Serbia, 2019)
This study presents the results of the theoretical assessment and a preliminary experimental investigation of technology metals (TM) recovery from magnetic fraction obtained after mechanical treatment of waste printed ...
Impact of Alumina Particles on the Morphology and Mechanics of Hybrid Wood Plastic Composite Materials
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
Hybrid composite panels of Wood-Plastic Composites (WPC) consisting of wood and poly (methyl methacrylate) (PMMA) were reinforced with alumina particles and made by "hot pressing" method. Alumina-based particles were made ...