Претраживање
Приказ резултата 31-40 од 74
Adsorption performances of branched aminated waste polyacrylonitrile fibers: experimental versus modelling study
(Desalination Publ, Hopkinton, 2019)
Synthesis of branched aminated waste polyacrylonitrile (PAN) fibers, realized in a three addition/amidation successive steps, was performed in order to obtain AS3-PAN adsorbent. Influence of various operating parameters ...
Isopiestic Determination of the Osmotic and Activity Coefficients of the {yNaH(2)PO(4)+(1-y)KH2PO4}(aq) System at T=298.15K
(Springer/Plenum Publishers, New York, 2019)
Isopiestic measurements have been made for aqueous mixtures of NaH2PO4 and KH2PO4 at T=(298.15 +/- 0.01) K, at NaH2PO4 ionic strength fractions y=(0, 0.19108, 0.38306, 0.58192, and 1), assuming that both electrolytes ...
Nano-finishing of cellulose textile materials with copper and copper oxide nanoparticles
(Springer, Dordrecht, 2019)
Nano-finishing of textile materials with metal and metal oxide nanoparticles has been in the focus of science and textile industry almost two decades. The emergence of bacteria resistance to silver nanoparticles due to ...
Catalytic activity of SnO2- and SO4 /SnO2-containing clinoptilolite in the esterification of levulinic acid
(Elsevier B.V., 2019)
Catalysts based on natural zeolite - clinoptilolite loaded with either SnO2 (TOHCLI) or sulfated SnO2 (STOHCLI) were prepared and tested in the esterification of levulinic acid (LA) with octanol or ethanol. The Sn content ...
Influence of 1,2,3,4-butanetetracarboxylic acid concentration on in situ synthesis of cuo/cu2o nanoparticles on cotton and viscose rayon fabrics
(Editura Acad Romane, Bucuresti, 2019)
This study discusses the possibility of in situ synthesis of Cu-based nanoparticles (NPs) on cotton and viscose rayon fabrics previously modified with 1,2,3,4-butanetetracarboxylic acid (BTCA) of different concentrations, ...
The influence of alumina crystal structures on the morphology and surface erosion of PMMA composite materials exposed to cavitation testing
(Elsevier Science Sa, Lausanne, 2019)
Composites are materials that reach many users and therefore, it is necessary to correlate the properties of every component on the behaviour of the material. Alumina is used as reinforcement with the aim of improving ...
Bioprocessing of agro-industrial residues into lactic acid and probiotic enriched livestock feed
(Wiley, Hoboken, 2019)
BACKGROUND Growing challenges of resource depletion, food security and environmental protection are putting stress on the development of biorefinery processes for bioprocessing of residues from food and agro-industry into ...
Supercritical CO2 - assisted production of PLA and PLGA foams for controlled thymol release
(Elsevier Science Bv, Amsterdam, 2019)
Amorphous, medical grade poly(D,L-lactic acid) (PLA) and poly(D,L-lactic-co-glycolic acid) (PLGA) were used to develop systems for controlled release of a natural bioactive substance - thymol. Supercritical carbon dioxide ...
Arsenic removal by copper-impregnated natural mineral tufa part II: a kinetics and column adsorption study
(Springer Heidelberg, Heidelberg, 2019)
This batch and column kinetics study of arsenic removal utilized copper-impregnated natural mineral tufa (T-Cu(A-C)) under three ranges of particle size. Non-competitive kinetic data fitted by the Weber-Morris model and ...
Effect of surface activation of alumina particles on the performances of thermosetting-based composite materials
(Sage Publications Ltd, London, 2019)
Two types of alumina particles, commercial (c-Al2O3) and iron doped (Fe-Al2O3), were functionalized with 3-(aminopropyl)trimethoxysilane (one-step) and two-step consecutive process, i.e. firstly using 3-(aminopropyl)trim ...