Претраживање
Приказ резултата 21-30 од 49
Biodegradation of cotton fabric impregnated with TiO2 nanoparticles
(Srpsko hemijsko društvo, Beograd, 2019)
Commercial P25 TiO2 nanoparticles are widely exploited as an efficient photocatalyst. In the textile domain, these nanoparticles are used for the production of self-cleaning, highly UV protective textiles, with an antimicrobial ...
The influence of short thermal treatment on structure, morphology and optical properties of Er and Pr doped ceria pigments: Comparative study
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2019)
Potential non-toxic pink and red ceramic pigments based on CeO2 were successfully synthesized by self-propagating room temperature method and thermally treated at 600, 900 and 1200 degrees C for 15 min. The structure, ...
Photocatalytic Degradation of Bisphenol A with alpha-Fe2O3 Fibers and Particles
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2019)
Two-step synthesis of Fe2O3 particles, performed by precipitation from iron(III) chloride (FeCl3 center dot 6H(2)O) using ammonium hydroxide in first step and calcination at 400 and 700 degrees C during 4 h, provided Fe2O3 ...
Electrophoretically deposited hydroxyapatite-based composite coatings loaded with silver and gentamicin as antibacterial agents
(Srpsko hemijsko društvo, Beograd, 2019)
Increasing need for improved, compatible bone tissue implants led to the intensive research of novel biomaterials, especially hydroxyapatite (HAP)-based composite materials on titanium and titanium alloy surfaces. Owing ...
Salt template zirconia reinforcing particles as possible reinforcement for PMMA matrix composite
(Sage Publications Ltd, London, 2019)
To obtain flakes like zirconia particles at relatively low temperature, the synthesis method for producing zirconia particles on the surface of salt particles that serve as a template is examined. The produced particles ...
Recyclability of technology metals from E-waste: Case study of in and Ga recovery from magnetic fraction
(Association of Metallurgical Engineers of Serbia, 2019)
This study presents the results of the theoretical assessment and a preliminary experimental investigation of technology metals (TM) recovery from magnetic fraction obtained after mechanical treatment of waste printed ...
Statistical modeling and optimization of ultrasound-assisted biodiesel production using various experimental designs / Statističko modelovanje i optimizacija proizvodnje biodizela u prisustvu ultrazvuka primenom različitih eksperimentalnih planova
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
The present study compares the performances of the regression models developed by the response surface methodology combined with the full factorial, Box-Behnken or face central composite designs applied for the ultrasound-assisted ...
The influence of Mg and Mn content on abnormal grain growth in AA5182 type alloys
(Savez inženjera metalurgije Srbije, Beograd, 2019)
The occurrence of abnormal grain growth (AGG) in AA5182 alloy during annealing imposes severe restrictions on processing parameters and deteriorates mechanical properties. In this work, we investigated the effect of chemical ...
Hybrid denture acrylic composites with nanozirconia and electrospun polystyrene fibers
(Public Library Science, San Francisco, 2019)
The processing and characterization of hybrid PMMA resin composites with nano-zirconia (ZrO2) and electrospun polystyrene (PS) polymer fibers were presented in this study. Reinforcement was selected with the intention to ...
Characterization of vacuum plasma spray NiCoCrAlY coating resistant to high temperature oxidation / Karakterizacija vakuum plazma sprej prevlake NiCoCrAlY otporne na visokotemperaturnu oksidaciju
(Engineering Society for Corrosion, Belgrade, Serbia, 2019)
Protective vacuum plasma spray VPS - NiCoCrAlY coating is used on sections of gas turbines to allow for longer and more reliable operation of sections exposed to aggressive effects of high temperature oxidation. Depositing ...