Search
Now showing items 41-50 of 59
Deep Eutectic Solvent Based Reversed-Phase Dispersive Liquid–Liquid Microextraction and High-Performance Liquid Chromatography for the Determination of Free Tryptophan in Cold-Pressed Oils
(MDPI, 2023)
A fast and straightforward reversed-phase dispersive liquid–liquid microextraction (RP-DLLME) using a deep eutectic solvent (DES) procedure to determine free tryptophan in vegetable oils was developed. The influence of ...
Studying the influence of common wet processes on the quality of 1 × 1 rib cotton/elastane knitted fabrics
(SAGE Publications Ltd, 2022)
This research studied the influence of common wet processes (i.e. bleaching, dyeing, or softening) on the quality of 1 × 1 rib cotton/elastane knitted fabrics. The changes in their structural (thickness, weight, and stitch ...
Activity Coefficients of the System { yKCl + (1 - y)KH2PO4}(aq) at T = 298.15 K Determined by Cell Potential Measurements
(American Chemical Society, 2022)
Zero-current cell potential measurements were used to determine the solution activity coefficient in a ternary system {yKCl + (1 - y) KH2PO4}(aq) at temperature T = 298.15 K. The cell of the type K-ISE|KCl(mKCl), ...
Impact properties of Kolon/PVB fabrics reinforced with rice-husk silica particles
(Materials Letters, 2022)
This study presents the impact properties of the new form of hybrid thermoplastic composites. The Kolon fabrics were impregnated with the 10 wt% poly (vinyl butyral) (PVB)/ethanol solution with the addition of silica (SiO2) ...
Plasma Treatment as a Sustainable Method for Enhancing the Wettability of Jute Fabrics
(MDPI, 2023)
In this paper, raw jute fabric was subjected to atmospheric pressure dielectric barrier discharge (at 150 or 300 Hz) to enhance its wettability, i.e., capillarity and wetting time. Attenuated Total Reflectance-Fourier ...
Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
(MDPI, 2023)
Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic ...
Mechanical properties of acrylate matrix composite reinforced with manganese-aluminum layered double hydroxide
(John Wiley and Sons Inc., 2023)
Acrylate polymers are used in several applications such as dentistry, medicine, and industry. The modification of their properties using the reinforcement is of key importance for the possible applications. Layered double ...
Antimicrobial and UV protective chitosan/lignin multilayer nanocoating with immobilized silver nanoparticles
(John Wiley and Sons Inc., 2023)
Poor antimicrobial activity and lack of protection against UV irradiation are weaknesses of cotton textiles. In an attempt to impart superior antimicrobial and UV-protective properties to cotton, layer-by-layer deposition ...
Application of the Integrated Supercritical Fluid Extraction–Impregnation Process (SFE-SSI) for Development of Materials with Antiviral Properties
(MDPI, 2022)
The integrated supercritical fluid extraction–impregnation process (SFE-SSI) was performed to fabricate material with antiviral properties against the herpes simplex virus (HSV). Cotton gauze and starch/chitosan polymer ...
Self-healing capability of novel eco-epoxy adhesives based on the modified tannic acid on Al adherends tested in a single lap joint
(Elsevier Ltd., 2022)
The aim of this paper is to study the self-healing capability of fractured Al joints bonded with novel eco-epoxide adhesives synthesized from a bio-renewable raw material (tannic acid – TA). Two synthesized eco-epoxy ...