Претраживање
Приказ резултата 11-20 од 26
Structure and photocatalytic properties of sintered TiO2 nanotube arrays
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
One-dimensional (1D) TiO2 nanotubes perpendicular to the substrate were obtained by electrochemical oxidation of titanium foil in an acid electrolyte. In order to alter the crystallinity and the morphology of films the ...
Brewers' spent grain and thin stillage as raw materials in l-(+)-lactic acid fermentation
(Inst Brewing, London, 2018)
Brewer's spent grain (BSG) hydrolysates were used for l-(+)-lactic acid (LA) fermentation by Lactobacillus rhamnosus ATCC 7469. In this study the effect of the addition of various amounts of thin stillage (TS) in BSG ...
Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition
(Carl Hanser Verlag, 2018)
Pulse-reverse power modes are used in galvanotechniques in order to obtain coatings with better characteristics in terms of gloss, adhesion, tracking sharp edges and uniform distribution of deposits on complex shape objects, ...
Formation of a large-area monolayer of polystyrene film via the spin-coating method
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2018)
The self-assembly methods, an inexpensive and high throughput technique capable of producing nanostructure arrays, relies on the formation on a monolayer of self-assembled nanospheres. This paper reports on the formation ...
Degradation of nicosulfuron using fenton and fenton-like reactions
(Savez hemijskih inženjera, Beograd, 2018)
Nicosulfuron, a sulfonylurea herbicide, was subjected to different Fenton reactions at pH of a nicosulfuron aqueous solution (pH 5). Usually, the optimal pH for the Fenton reaction is between 3 and 4, but the addition of ...
Influence of surface modification to mechanical and thermal properties of nanomodified acrylic dental resin
(Inst Materials Physics, Bucharest, 2018)
This paper investigated the processing and characterization of dental nanocomposites based on poly(methyl methacrylate) (PMMA) matrix reinforced with zirconium dioxide (ZrO2) nanoparticles were prepared by in-situ free ...
Development and validation of a stability-indicating LC-UV and LC-MS/MS methods for quantitative analysis of anisomycin and identification of degradation products
(University of Sao Paulo, Conjunto Quimicas, Sao Paulo, 2018)
Multifunctional drug anisomycin was subjected to forced degradation in accordance with International Conference on Harmonisation (ICH) guidelines for the first time. The drug was exposed to the recommended stress conditions ...
Removal of textile dyes from water by TiO2 nanoparticles immobilized on poly(ε-caprolactone) beads and foams
(Serbian Chemical Society, Belgrade, 2018)
This study discusses the possibility of immobilization of colloidal TiO2 nanoparticles (NPs) onto poly(ε-caprolactone) (PCL) beads and foams that could be utilized for the removal of textile dyes from water by photodegradation. ...
The effect of CaO and MgO addition and cooling rate on stability of slag obtained after jarosite and neutral leaching residue treatment in the Waelz process
(Oficyna Wydawnicza Politechniki Wroclawskiej, Wroclaw, 2018)
Jarosite and neutral leaching residue (NLR) are the greatest environmental problems of hydrometallurgical zinc production due to their high quantity and hazardous content. Pyrometallurgical processes, such as the Waelz ...
Design of anti-tarnish sterling silver ag-cu-zn alloy and investigation of silicon addition influence on mechanical and corrosion characteristics / Dizajn legura sterling srebra Ag-Cu-Zn otpornih na tamnjenje i ispitivanje uticaja dodatka silicijuma na mehaničke i korozione karakteristike
(Association of the Chemical Engineers of Serbia, 2018)
This paper presents investigations of the influence of silicon addition on the mechanical and corrosion characteristics of the sterling silver Ag-Cu-Zn alloys. The procedure for obtaining Ag-Cu-Zn-Si alloys in small ranges ...