Претраживање
Приказ резултата 11-20 од 73
Synthesis of 4,6-dimethyl-3-cyano-2-pyridone catalysed by amino acids / Sinteza 4,6-dimetil-3-cijano-2-piridona katalizovana aminokiselinama
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
In this work the synthesis of 4,6-dimethyl-3-cyano-2-pyridone catalyzed by amino acids was studied. In the first part of the work, the optimization was carried out by varying the initial concentration of glycine, the molar ...
Examination of the effectiveness of filtering half masks protection at various flow rates of aerosol contaminants / Ispitivanje efikasnosti zaštite filtrirajućih polumaski pri različitim protocima aerosolnih kontaminanata
(Engineering Society for Corrosion, Belgrade, Serbia, 2017)
The possibility of air contamination by biological agents, by natural or artificial way, requires the improvement and use of different means for respiratory protection. The paper presents comparative filtration efficiency ...
Anti-tarnish silver alloys in system ag-cu-zn-si with the addition of aluminum
(Association of Metallurgical Engineers of Serbia AMES, 2018)
This paper presents investigations of aluminum addition influence on the corrosion characteristics of the sterling silver Ag-Cu-Zn-Si alloys. The procedure for obtaining Ag-Cu-Zn-Al-Si alloys in small ranges of predefined ...
The effect of calcinated hydroxyapatite and magnesium doped hydroxyapatite as fillers on the mechanical properties of a model bisgma/tegdma dental composite initially and after aging
(Savez inženjera metalurgije Srbije, Beograd, 2018)
This study aimed to investigate the possibility of modifying model BisGMA/TEGDMA dental composite by substituting 10 wt. % of conventional glass fillers with bioactive fillers based on calcinated nanosized hydroxyapatite ...
Bisphenol a removal from aqueous solution using fine alpha-fe2o3 particles
(Savez inženjera metalurgije Srbije, Beograd, 2018)
Iron(III) oxide particles (alpha-Fe2O3) were obtained from ferrous chloride (FeCl3 center dot 6H(2)O) precursor using ammonium hydroxide as a precipitating agent and particles were calcined at 700 degrees C for 4 h. ...
Assessment of sampling and chemical analysis of waste printed circuit boards from weee: gold content determination
(Savez inženjera metalurgije Srbije, Beograd, 2019)
Waste printed circuit boards (WPCBs) from discarded mobile phones and smartphones are considerably heterogeneous materials with a high gold content (approx. 490 grams per ton). The aim of our chemical analysis of samples ...
Failures of brass condenser tubes
(Society for Structural Integrity and Life, Institute for Material Testing, 2016)
Causes of failure of brass condenser tubes (CuZn28Sn1) in a thermal power plant in Serbia are analysed. Results of testing by Fourier transformed infrared spectroscopy (FTIR) have indicated the presence of ammonia and ...
Alkyd nanocomposite coatings based on waste pet glicolyzates and modified silica nanoparticles / Alkid nanokompozitni premazi bazirani na otpadnim pet glikolizatima modifikovani nanočesticama silike
(Engineering Society for Corrosion, Belgrade, Serbia, 2016)
Synthesis of high-performance alkyd resins (ARs) based on waste poly(ethylene terephthalate) (PET) glycolyzates is presented. PET glycolyzates were synthesized by catalytic depolymerization with trimethylolpropane (TMP) ...
Ni-pd/al(2)o(3) catalyst supported on reticulated ceramic foam for dry methane reforming
(Savez inženjera metalurgije Srbije, Beograd, 2015)
In the present study, Ni-Pd/Al2O3 catalyst supported on alpha-Al2O3 based foam was prepared and evaluated in the dry methane reforming process. Corresponding metal chlorides were deposited to the foam surface by impregnation ...
Naponska korozija metala i legura i njihovih zavarenih spojeva, Deo I: uslovi nastanka naponske korozije
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, Srbija, 2012)
Opisani su osnovni mehanizmi naponske korozije različitih metala i legura i njihovih zavarenih spojeva. Detaljnije su
razmotreni metalurški i korozioni uslovi nastanka naponske korozije ugljeničnih i niskolegiranih čelika, ...