Претраживање
Приказ резултата 11-20 од 24
Sorption of textile dyes from textile wastewater by chitosan-based hydrogel / Sorpcija boja za tekstil iz tekstilnih otpadnih voda pomoću hidrogela na bazi hitozana
(Savez inženjera i tehničara Srbije, Beograd, 2018)
With the excessive risks that are present in today's environment, it is of great importance to treat wastewaters before their discharge in water streams. One of the everyday challenges is design of a low-cost and environmentally ...
The influence of the shape and size of the AL2O3 particles on the flexural properties of the PMMA composite modified by the addition of dimethyl itaconate / Uticaj oblika i veličine čestica AL2O3 na savojna svojstva PMMA kompozita modifikovanog dodatkom dimetil itakonata
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Dental materials have specific requirements regarding behavior in exploitation conditions. Poly (methyl methacrylate) (PMMA) is one of the most commonly used prosthetic materials. It is of interest to improve the mechanical ...
Impregnation of cellulose acetate films with carvacrol using supercritical carbon ioxide / Impregnacija filmova acetata celuloze karvakrolom pomoću natkritičnog ugljenik(IV)-oksida
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Cellulose acetate films were impregnated with carvacrol using supercritical carbon dioxide. The supercritical impregnation process, conducted in a static regime at pressure of 21 MPa and temperature of 50°C, was optimized ...
Microvickers hardness determination of unsaturated polyester resins reinforced with alumina based reinforcement / Ispitivanje mikrotvrdoće nezasićenih poliestarskih smola sa ojačanjima na bazi aluminijum oksida
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Commercial alumina wiskers (Al2O3 w) and synthesized alumina particles via sol-gel technique (Al2O3 m) were used as reinforcement in unsaturated polyester resins (UPR). Composite materials with the addition of 0.1 wt. %, ...
Innovative solutions for the extraction of technology metals from complex primary and secondary raw materials / Inovativna rešenja u ekstraktivnoj metalurgiji kompleksnih primarnih i sekundarnih sirovina
(Savez inženjera i tehničara Srbije, Beograd, 2016)
Presented compilation of scientific, theoretical and experimental results, promotes an innovative synergy of various metals and industrial activities in metallurgy, resulting in profitable transformation of byproducts and ...
The impact of wood fiber surface modification on physical properties of wood-polymer composites / Uticaj modifikacije površine vlakana drveta na mehanička svojstva kompozita polimer-drvo
(Savez inženjera i tehničara Srbije, Beograd, 2016)
In this paper, the impact of wood fiber surface modification on mechanical properties of poly-(methyl methacrylate)(PMMA)-wood composite was examined. FTIR analysis has shown that the wood fiber surface modification was ...
Examination of mechanical properties of acrilyc composite materials with different AL2O3 reinforcement by brazil test / Ispitivanje mehaničkih svojstava akrilatnih kompozitnih materijala sa različitim AL2O3 ojačanjima brazilskim testom
(Savez inženjera i tehničara Srbije, Beograd, 2019)
Composite materials based on UV-curing acrylates and various alumina-based reinforcements represent material that is suitable for the use in dentistry, but also in other areas. Composites were made using four different ...
Effect of AL2O3 particles on the toughness of hybrid composite with EVA matrix and UHMWPE fibersas reinforcement / Uticaj AL2O3 čestica na žilavost hibridnog kompozita sa EVA matricom ojačanog UHMWPE vlaknima
(Savez inženjera i tehničara Srbije, Beograd, 2018)
The aim of this paper is to investigate the mechanical properties of hybrid composites with the polymer matrix of the copolymer of ethylene and vinyl acetate (EVA), ultra high molecular weight polyethylene fibers (UHMWPE) ...
Synthesis and properties of nano-hydroxyapatite/poly (methacrylic acid) composite hydrogels / Uticaj neutralizacije na svojstva poroznih hidrogelova na bazi hidroksiapatita i poli(metakrilne kiseline) sintetisanih slobodno-radikalskom polimerizacijom
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Goals. The goal of this study was a development of biocompatible composite hydrogels, structurally similar to native bone tissue, by incorporation of ~60 wt % of calcium hydroxyapatite (HA) into a matrix of hydrogels. Also, ...
Atmospheric leaching of copper from oxide-sulfide ore using sulfuric acid / Atmosfersko luženje bakra iz oksidno-sulfidne rude rastvorom sumporne kiseline
(Savez inženjera i tehničara Srbije, Beograd, 2020)
High flexibility of hydrometallurgical operations as well as economic and environmental acceptability, offer the opportunity to selectively obtain metals in the early stages of the processing. This enables the application ...