Претраживање
Приказ резултата 91-100 од 105
Influence of annealing temperature on the baking response and corrosion properties of an Al-4.6 wt% Mg alloy with 0.54 wt% Cu
(Elsevier Science Sa, Lausanne, 2015)
The effect of different thermo-mechanical processing parameters on the baking response, and intergranular corrosion (IGC) resistance of an Al-4.6 wt% Mg-0.54 wt% Cu alloy was investigated. It has been shown that the high ...
Towards sustainability of lactic acid and poly-lactic acid polymers production
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
Lactic acid (LA) is a platform chemical which can be produced biotechnologically on agricultural residues, wastes and by-products and further used for production of biodegradable, biocompatible LA polymers. These polymers ...
Multifunctional jute fabrics obtained by different chemical modifications
(Springer, 2020)
The aim of the present research is first to reduce the jute fabric non-cellulosic components by using different chemical modifications (i.e. alkali and oxidative) and then to analyze their influence on the jute fabric ...
Batch and column adsorption of cations, oxyanions and dyes on a magnetite modified cellulose-based membrane
(Springer, Dordrecht, 2020)
An optimized method is presented to make magnetite (MG) modified cellulose membrane (Cell-MG) from 3-aminopropyltriethoxysilane and diethylenetriaminepentaacetic acid dianhydride functionalized waste cell fibers; (Cell-NH(2)and ...
Adhesion testing of composites based on Bis-GMA/TEGDMA monomers reinforced with alumina based fillers on brass substrate
(Elsevier Sci Ltd, Oxford, 2018)
Quantitative assessment of the adhesion behavior between the composite film having UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as matrix and the aluminum oxide based ...
Role of the bifurcated intramolecular hydrogen bond on the physicochemical profile of the novel azo pyridone dyes
(Elsevier Sci Ltd, Oxford, 2019)
A series of novel 5-(4-substituted phenylazo)-1-carboxymethyl-3-cyano-6-hydroxy-4-methyl-2-pyridones had been synthesized and characterized. The study includes spectral determination of the possible tautomeric forms and ...
Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping
(Elsevier Sci Ltd, Oxford, 2019)
Highly ordered, anodically grown TiO2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping ( lt = 2 at.%) in the titanium oxide lattice. FESEM micrographs revealed ...
Obtaining jute fabrics with enhanced sorption properties and "closing the loop" of their lifecycle
(Industrial Crops and Products, 2021)
The objective of this investigation was to obtain jute fabrics with enhanced sorption properties (by using simple and cost-effective alkali and oxidative modifications) and a long life cycle. The applied alkali modifications ...
Investigation of corrosion behaviour of carbon nanotubes coated basalt fabric as a reinforcement material
(Elsevier Sci Ltd, Oxford, 2019)
In this study, the corrosion behaviour of carbon nanotubes (CNTs) coated basalt fibre (BF) (BFCNTs) obtained by chemical vapour deposition (CVD), was studied. During CVD, the CNTs were grown on BF, (a) at different growth ...
Valorization of damaged rice grains: Optimization of bioethanol production by waste brewer's yeast using an amylolytic potential from the Paenibacillus chitinolyticus CKS1
(Elsevier Sci Ltd, Oxford, 2018)
Damaged grains that are not useful for food or feed are abundant and cheap. The main objective of this paper was to valorize damaged rice grains for bioethanol production using presacchararification step followed by ...