Претраживање
Приказ резултата 81-90 од 105
Mg/Cu co-substituted hydroxyapatite - Biocompatibility, mechanical properties and antimicrobial activity
(Elsevier Sci Ltd, Oxford, 2019)
The aim of this study was to improve the mechanical properties and to optimize antimicrobial activity of hydroxyapatite (HAP) by simultaneous doping with Mg and Cu ions in order to obtain material that would be able to ...
Valorization of damaged rice grains: Optimization of bioethanol production by waste brewer's yeast using an amylolytic potential from the Paenibacillus chitinolyticus CKS1
(Elsevier Sci Ltd, Oxford, 2018)
Damaged grains that are not useful for food or feed are abundant and cheap. The main objective of this paper was to valorize damaged rice grains for bioethanol production using presacchararification step followed by ...
Investigation of corrosion behaviour of carbon nanotubes coated basalt fabric as a reinforcement material
(Elsevier Sci Ltd, Oxford, 2019)
In this study, the corrosion behaviour of carbon nanotubes (CNTs) coated basalt fibre (BF) (BFCNTs) obtained by chemical vapour deposition (CVD), was studied. During CVD, the CNTs were grown on BF, (a) at different growth ...
Batch and column adsorption of cations, oxyanions and dyes on a magnetite modified cellulose-based membrane
(Springer, Dordrecht, 2020)
An optimized method is presented to make magnetite (MG) modified cellulose membrane (Cell-MG) from 3-aminopropyltriethoxysilane and diethylenetriaminepentaacetic acid dianhydride functionalized waste cell fibers; (Cell-NH(2)and ...
Sorption and dielectric properties of jute woven fabrics: Effect of chemical composition
(Elsevier B.V., 2019)
The jute woven fabric was treated with sodium hydroxide and sodium chlorite under different conditions in order to study the influence of the chemical composition on their sorption and dielectric properties. After the ...
Adhesion testing of composites based on Bis-GMA/TEGDMA monomers reinforced with alumina based fillers on brass substrate
(Elsevier Sci Ltd, Oxford, 2018)
Quantitative assessment of the adhesion behavior between the composite film having UV cured Bis-GMA (Bisphenol A glycidylmethacrylate)/TEGDMA (triethylene glycol dimethacrylate) as matrix and the aluminum oxide based ...
Towards sustainability of lactic acid and poly-lactic acid polymers production
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
Lactic acid (LA) is a platform chemical which can be produced biotechnologically on agricultural residues, wastes and by-products and further used for production of biodegradable, biocompatible LA polymers. These polymers ...
Dry-pressed anodized titania nanotube/CH3NH3PbI3 single crystal heterojunctions: The beneficial role of N doping
(Elsevier Sci Ltd, Oxford, 2019)
Highly ordered, anodically grown TiO2 nanotubes on titanium supports were annealed in ammonia atmosphere in order to incorporate nitrogen doping ( lt = 2 at.%) in the titanium oxide lattice. FESEM micrographs revealed ...
Obtaining jute fabrics with enhanced sorption properties and "closing the loop" of their lifecycle
(Industrial Crops and Products, 2021)
The objective of this investigation was to obtain jute fabrics with enhanced sorption properties (by using simple and cost-effective alkali and oxidative modifications) and a long life cycle. The applied alkali modifications ...
Trends in Encapsulation Technologies for Delivery of Food Bioactive Compounds
(Springer, New York, 2015)
The food industry expects increasingly complex properties (such as delayed release, stability, thermal protection, and suitable sensorial profile) from food ingredients, which often would not be able to be achieved without ...