Претраживање
Приказ резултата 31-40 од 188
Modification of natural clinoptilolite for nitrate removal from aqueous media
(Srpsko hemijsko društvo, Beograd, 2014)
Natural zeolitic tuff from the Zlatokop mine (Vranjska Banja deposit, Serbia) was investigated as the starting material to obtain a low cost adsorbent for the removal of nitrate from aqueous media. The tuff rich in zeolite, ...
Recycling of Precious Metals from E-scrap
(Jihad Daneshgahi, Tehran, 2013)
Recovery of gold and other valuable metals from electronic scrap involves a complex metallurgical flow sheet and requires state-of-the-art recovery technologies that are available in large-scale, integrated smelter and ...
Electrochemical decolorization of CI Acid Orange 3 in the presence of sodium chloride at iridium oxide electrode
(Springer International Publishing Ag, Cham, 2017)
The electrocatalytic degradation of C.I. Acid Orange 3 from simulated wastewater by indirect electrochemical oxidation using an IrOx electrode was investigated. The effects of different operating parameters on the rate of ...
Quantitative Structure-Retention Relationships Modeling and Multivariate Data Analysis of Lipophilicity Data of New Spirohydantoin Derivatives
(Akademiai Kiado Zrt, Budapest, 2016)
Modeling properties of newly synthesized compounds is important for both understanding their activity and predicting their interactions. This paper describes the evaluation of the lipophilicity of the newly synthesized ...
Poly(methyl methacrylate) denture base materials modified with ditetrahydrofurfuryl itaconate: Significant applicative properties
(Srpsko hemijsko društvo, Beograd, 2015)
The aim of this work was to examine the possibility of modification of commercial denture base materials with itaconic acid esters, in order to obtain materials with lower toxicity and higher biocompatibility. Despite their ...
Photocatalytic Performance of Carbon Monolith/TiO2 Composite
(Hindawi Ltd, London, 2015)
The new and simple approach for deposition of catalytically active TiO2 coating on carbon monolith (CM) carrier was presented. CM photocatalysts were impregnated with TiO2 using titanium solution and thermal treatment, and ...
Differences in the mode of thermomechanical processing between white gold alloys to produce semi-finished products
(Bulgarian Acad Science, Sofia, 2015)
The results of the investigation of the reduction degree on the hardness of a gold sample with chemical composition Au58,5Ag15Cu9,5Ni9Zn5Pd3 for old white gold alloy and Au58,5Ag18Cu10,5Ga8Zn5 (wt %) for new white gold ...
Testing the protective efficiency of personal respiratory protection devices in radiologically contaminated environments / Ispitivanje efikasnosti sredstava lične respiratorne zaštite u uslovima radiološke kontaminacije životne sredine
(Vinca Institute of Nuclear Sciences, 2013)
The use of ammunition primed with depleted uranium is one of the hallmarks of modern combat operations, resulting in environmental contamination by particles of depleted uranium and uranium oxide, scattered around in the ...
Raman spectroscopy study of anodic film on Ag43Cu37Zn20 alloy
(Natl Inst Optoelectronics, Bucharest-Magurele, 2016)
The objective of this study was characterization of anodic film obtained when Ag43Cu37Zn20 alloy was treated electrochemically in 3.5% wt. NaCI under potentiostatic conditions. At the potential of +0.25 V a complex multilayer ...
VOC emission from oil refinery and petrochemical wastewater treatment plant estimation / Procena emisija lakoisparljivih organskih jedinjenja iz postrojenja za primarni tretman otpadnih voda rafinerijskih i petrohemijskih postrojenja
(Association of Chemical Engineers of Serbia, 2013)
As a consequence of environmental legislation improvement in Serbia for industrial producers, especially future holders of Integrated Pollution Prevention Control (IPPC) license, it is necessary to report annually on ...