Претраживање
Приказ резултата 31-40 од 255
Measurement methods for residual stresses in CWR
(20th International Scientific Conference on Energy Management of Municipal Facilities and Sustainable Energy Technologies, EMMFT 2018, 2020)
Continuously welded rails are a part of the track structure since the 1950s. Total stresses in continuously welded rails include residual stresses generated during the manufacturing process as well as the service life of ...
Preparation of beechwood/polymer composites using the method of lyophilization and gamma irradiation
(Pergamon-Elsevier Science Ltd, Oxford, 2020)
Wooden cultural heritage serves as a very important source of information for historians and researchers. Also, it imposes an obligation on the science to keep this legacy for future generations in a proper condition. Among ...
Tetragonal CoMn2O4 nanocrystals on electrospun carbon fibers as high-performance battery-type supercapacitor electrode materials
(Royal Society of Chemistry, 2021)
We herein report a simple two-step procedure for fabricating tetragonal CoMn2O4 spinel nanocrystals on carbon fibers. The battery-type behavior of these composite fibers arises from the redox activity of CoMn2O4 in an ...
Antioxidant capacity of dark red corn – Biochemical properties coupled with electrochemical evaluation
(Revista de Chimie, 2020)
Biochemistry coupled with electrochemical approach is employed in a fast, relatively simple, yet highly precise detection of a plant extract antioxidant properties. Antioxidant capacity of dark red corn grains was investigated ...
Intraoral dental x-ray radiography in Bosnia and Herzegovina: study for revising diagnostic reference level value
(Oxford Univ Press, Oxford, 2020)
This paper presents the study that would allow a revision of the currently valid diagnostic reference level in intraoral dental X-ray radiography in Bosnia and Herzegovina. The study was conducted for six procedures that ...
Enhanced antimicrobial properties and bioactivity of 3D-printed titanium scaffolds by multilayer bioceramic coating for large bone defects
(IOP Publishing, 2023)
The restoration of large bone defects caused by trauma, tumor resection, or infection is a major clinical problem in orthopedics and dentistry because postoperative infections, corrosion, and limited osteointegration of ...
The effect of temperature on pollen germination and pollen tube growth of quince cultivars
(Int Soc Horticultural Science, Leuven 1, 2020)
The effect of three different temperatures (8, 16 and 24°C) on pollen germination and pollen tube growth in vitro in eight quince cultivars (‘Leskovacka’, Vranjska’, ‘Morava’, ‘Pazardzijska’, ‘Hemus’, ‘Asenica’, ‘Portugal’ ...
Examination of suitability of the cultivar 'Čačanska Lepotica' as a pollenizer for promising plum genotypes developed at FRI, Čačak (Serbia)
(Int Soc Horticultural Science, Leuven 1, 2020)
One of the most important plum (Prunus domestica L.) breeding objectives is regular and large yield which depends on the degree of self-fertility. Partially self-fertile and self-sterile genotypes require compatible ...
Using scanning electron microscopy to characterise plum (prunus domestica l.) Genotypes
(Publ House Bulgarian Acad Sci, Sofia, 2020)
Pollen grain micromorphological characterisation of four plum (Prunus domestica L.) genotypes from two different breeding programmes (Fruit Research Institute, Serbia, and Hohenheim, Germany) was performed using scanning ...
Simple and effective one-step production of high-quality mesoporous pyrolytic char from waste tires: Rhodamine B adsorption kinetics and density functional theory (DFT) study
(Diamond and Related Materials, 2022)
Pyrolytic tire (PT) chars were first produced from waste car tires (WCT) through carbonization process at 800 degrees C, for different retention times. Then, best PT-char sample by its physicochemical properties (WCT 800(1 ...