Претраживање
Приказ резултата 11-19 од 19
Stress corrosion cracking resistance of aluminum alloy 7000 series after two-step aging / Otpornost aluminijumske legure serije 7000 prema naponskoj koroziji posle dvostepenog termičkog taloženja
(Association of the Chemical Engineers of Serbia, 2015)
The effect of one-step and a new (short) two-step aging process on the resistance to stress corrosion cracking of an aluminum alloy 7000 series was investigated, using slow strain rate test and fracture mechanics method. ...
Effect of AL2O3 particles on the toughness of hybrid composite with EVA matrix and UHMWPE fibersas reinforcement / Uticaj AL2O3 čestica na žilavost hibridnog kompozita sa EVA matricom ojačanog UHMWPE vlaknima
(Savez inženjera i tehničara Srbije, Beograd, 2018)
The aim of this paper is to investigate the mechanical properties of hybrid composites with the polymer matrix of the copolymer of ethylene and vinyl acetate (EVA), ultra high molecular weight polyethylene fibers (UHMWPE) ...
Ag+, Cu2+ and Zn2+ doped hydroxyapatite/tricalcium phosphate bioceramics: Influence of doping and sintering technique on mechanical properties
(University of Novi Sad, Faculty of Technology, 2018)
Green hydroxyapatite ceramics were obtained by cold uniaxial and isostatic pressing of hydrothermally synthesized powders, pure hydroxyapatite and hydroxyapatite doped with Ag+, Cu2+ and Zn2+ ions. The ceramics were ...
Synthesis of α-Al2O3 based foams with improved properties as catalyst carriers
(Institute of Metals and Technology, 2014)
This paper explores the possibility of synthesising catalyst supports with improved properties. Alumina foams were produced with the polymer replication technique. Representative high- and low-temperature sintering ceramics ...
Mechanical properties of composites based on unsaturated polyester resins obtained by chemical recycling of poly(ethylene terephthalate) / Mehanička svojstva kompozita na bazi nezasićenih poliestarskih smola dobijenih hemijskom reciklažom poli(etilen-tereftalata)
(Association of Chemical Engineers of Serbia, 2013)
Composites based on unsaturated polyester (UPe) resins and fumed silica AEROSIL® RY 50, NY 50, RX 50 and NAX 50, as well as graphite, TiO2 or organically modified clay CLOISITE 30B were prepared in order to investigate the ...
Influence of an accumulative roll bonding (ARB) process on the properties of AA5083 Al-Mg alloy sheets
(Association of Metallurgical Engineers of Serbia AMES, 2014)
In this study, fully annealed AA5083 type alloy sheets with 1 mm in thickness
were processed by accumulative roll bonding (ARB) at room temperature, up to 6 ARB
cycles. It was found that microstructure was refined and ...
Characterization of tantalum coatings deposited using vacuum plasma spray process / Karakterizacija tantal prevlake deponovane vakuum plazma sprej procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Tantalum is a very popular material for the industry as a whole because of very important characteristics such as: high melting point, significant thermal and electrical conductivity, high toughness and resistance to ...
Mechanical and structural features of Nb coating layers deposited on steel substrates in a vacuum chamber / Mehaničke i strukturne karakteristike slojeva prevlake Nb deponovane u vakuumu
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
In this paper analyzed was the influence of implementation of inert Ar gas and a mixture of inert plasma Ar / He gases in a vacuum chamber on the deposition of reactive niobium (Nb) powder. The aim of this paper was to ...
Titanium dioxide nanoparticles surface modified with imine as fillers for epoxy resin / Nanočestice titan-dioksida površinski modifikovane iminom kao punioci za epoksidnu smolu
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2018)
The surface of anatase TiO2 nanoparticles was modified with in situ synthesized imine, based on 3,4-dihydroxybenzaldehyde and octadecylamine. The modified TiO2 nanoparticles were investigated using FTIR and UV-Vis spectroscopy, ...