Претраживање
Приказ резултата 11-19 од 19
Effect of surface activation of alumina particles on the performances of thermosetting-based composite materials
(Sage Publications Ltd, London, 2019)
Two types of alumina particles, commercial (c-Al2O3) and iron doped (Fe-Al2O3), were functionalized with 3-(aminopropyl)trimethoxysilane (one-step) and two-step consecutive process, i.e. firstly using 3-(aminopropyl)trim ...
Mehanička svojstva hibridnog kompozita UHMWPE/EVA ojačanog vlaknima dobijenim elektropredenjem / Mechanical properties of UHMWPE/EVA hybrid composite reinforced with fibers obtained by electrospinning
(Savez inženjera i tehničara Srbije, 2018)
Aluminijum oksidna (Al2O3) nanovlakna pripremljena su iz vodenog rastvora aluminijum hlorohidrata/poli(vinil alkohola) (PVA) korišćenjem tehnike elektropredenja. Maseni odnos aluminijum hlorohidrata/PVA bio je 5:1. Nakon ...
Synthesis of α-Al2O3 based foams with improved properties as catalyst carriers
(Institute of Metals and Technology, 2014)
This paper explores the possibility of synthesising catalyst supports with improved properties. Alumina foams were produced with the polymer replication technique. Representative high- and low-temperature sintering ceramics ...
Characterization of tantalum coatings deposited using vacuum plasma spray process / Karakterizacija tantal prevlake deponovane vakuum plazma sprej procesom
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
Tantalum is a very popular material for the industry as a whole because of very important characteristics such as: high melting point, significant thermal and electrical conductivity, high toughness and resistance to ...
Mechanical and structural features of Nb coating layers deposited on steel substrates in a vacuum chamber / Mehaničke i strukturne karakteristike slojeva prevlake Nb deponovane u vakuumu
(Engineering Society for Corrosion, Belgrade, Serbia, 2018)
In this paper analyzed was the influence of implementation of inert Ar gas and a mixture of inert plasma Ar / He gases in a vacuum chamber on the deposition of reactive niobium (Nb) powder. The aim of this paper was to ...
Mechanical properties of composites based on unsaturated polyester resins obtained by chemical recycling of poly(ethylene terephthalate) / Mehanička svojstva kompozita na bazi nezasićenih poliestarskih smola dobijenih hemijskom reciklažom poli(etilen-tereftalata)
(Association of Chemical Engineers of Serbia, 2013)
Composites based on unsaturated polyester (UPe) resins and fumed silica AEROSIL® RY 50, NY 50, RX 50 and NAX 50, as well as graphite, TiO2 or organically modified clay CLOISITE 30B were prepared in order to investigate the ...
Influence of an accumulative roll bonding (ARB) process on the properties of AA5083 Al-Mg alloy sheets
(Association of Metallurgical Engineers of Serbia AMES, 2014)
In this study, fully annealed AA5083 type alloy sheets with 1 mm in thickness
were processed by accumulative roll bonding (ARB) at room temperature, up to 6 ARB
cycles. It was found that microstructure was refined and ...
Examination of mechanical properties of acrilyc composite materials with different AL2O3 reinforcement by brazil test / Ispitivanje mehaničkih svojstava akrilatnih kompozitnih materijala sa različitim AL2O3 ojačanjima brazilskim testom
(Savez inženjera i tehničara Srbije, Beograd, 2019)
Composite materials based on UV-curing acrylates and various alumina-based reinforcements represent material that is suitable for the use in dentistry, but also in other areas. Composites were made using four different ...
Titanium dioxide nanoparticles surface modified with imine as fillers for epoxy resin / Nanočestice titan-dioksida površinski modifikovane iminom kao punioci za epoksidnu smolu
(Univerzitet u Nišu - Tehnološki fakultet, Leskovac, 2018)
The surface of anatase TiO2 nanoparticles was modified with in situ synthesized imine, based on 3,4-dihydroxybenzaldehyde and octadecylamine. The modified TiO2 nanoparticles were investigated using FTIR and UV-Vis spectroscopy, ...