Претраживање
Приказ резултата 51-60 од 348
Failures of brass condenser tubes
(Society for Structural Integrity and Life, Institute for Material Testing, 2016)
Causes of failure of brass condenser tubes (CuZn28Sn1) in a thermal power plant in Serbia are analysed. Results of testing by Fourier transformed infrared spectroscopy (FTIR) have indicated the presence of ammonia and ...
beta-Amylase production from packaging-industry wastewater using a novel strain Paenibacillus chitinolyticus CKS 1
(Royal Society of Chemistry, 2015)
Transport packaging factories generate a large amount of wastewater that contains residuals of starch glue. These residuals could be used as substrates for microorganism growth and enzyme production. In this study, ...
Integrated procedure for recycling and valorization of useful components from secondary raw materials based on hard metals
(Savez inženjera metalurgije Srbije, Beograd, 2017)
Wide application of hard metals requires increased consumption of their constituents. Their high cost and scarcity impose the need for finding new, both ecologically and economically justified ways for their production. ...
Ag+, Cu2+ and Zn2+ doped hydroxyapatite/tricalcium phosphate bioceramics: Influence of doping and sintering technique on mechanical properties
(University of Novi Sad, Faculty of Technology, 2018)
Green hydroxyapatite ceramics were obtained by cold uniaxial and isostatic pressing of hydrothermally synthesized powders, pure hydroxyapatite and hydroxyapatite doped with Ag+, Cu2+ and Zn2+ ions. The ceramics were ...
Nimonic 263 microstructure and surface characterization after laser shock peening
(Croatian Metallurgical Soc, Zagreb, 2015)
The Laser Shock Peening (LSP) is applied to the surface of Nimonic 263 alloy. The changes in microstructure and surface topography are observed and analyzed by Scanning Electron Microscopy (SEM), profilometer and microhardness ...
Failures of Brass Condenser Tubes / Lomovi kondenzatorskih cevi od mesinga
(Institut za ispitivanje materijala, Beograd, 2016)
Causes of failure of brass condenser tubes (CuZn28Sn1) in a thermal power plant in Serbia are analysed. Results of testing by Fourier transformed infrared spectroscopy (FTIR) have indicated the presence of ammonia and ...
Structural, Morphological and Electrical Properties of Alumina/YAG Composites as Solid Electrolyte for IT - SOFC
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
Alumina/YAG composites (AYX_t) with high relative density (99.2 %TD) were successfully obtained by mixing commercial alumina powder with different volume fractions of yttrium aluminium garnet (Y3Al5O12-YAG; 7, 14, 21 and ...
Visible light absorption of TiO2 nanoparticles surface-modified with vitamin B-6: A comparative experimental and DFT study
(Srpsko hemijsko društvo, Beograd, 2018)
Surface modification of titanium dioxide nanoparticles (TiO2 NPs) with the biologically active molecule pyridoxine hydrochloride (vitamin B-6) was found to alter the optical properties. Microstructural characterization ...
The influence of the shape and size of the AL2O3 particles on the flexural properties of the PMMA composite modified by the addition of dimethyl itaconate / Uticaj oblika i veličine čestica AL2O3 na savojna svojstva PMMA kompozita modifikovanog dodatkom dimetil itakonata
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Dental materials have specific requirements regarding behavior in exploitation conditions. Poly (methyl methacrylate) (PMMA) is one of the most commonly used prosthetic materials. It is of interest to improve the mechanical ...
Structural properties of carbon microspheres obtained by hydrothermal treatment of fructose / Strukturne osobine mikrosfera ugljenika dobijenih hidrotermičkim tretmanom fruktoze
(Engineering Society for Corrosion, Belgrade, Serbia, 2015)
A carbon-rich solid product has been synthesized by hydrothermal treatment from fructose with HNO3 at temperature of 140°C. The concentration of the precursor was changed in order to investigate how its change influences ...