Претраживање
Приказ резултата 11-20 од 20
Impregnation of cellulose acetate films with carvacrol using supercritical carbon ioxide / Impregnacija filmova acetata celuloze karvakrolom pomoću natkritičnog ugljenik(IV)-oksida
(Savez inženjera i tehničara Srbije, Beograd, 2018)
Cellulose acetate films were impregnated with carvacrol using supercritical carbon dioxide. The supercritical impregnation process, conducted in a static regime at pressure of 21 MPa and temperature of 50°C, was optimized ...
Examination of the adhesion of polymer composite films based on Bis-GMA/TEGDMA on different metal substrates / Ispitivanje adhezije polimernih kompozitnih filmova na bazi Bis-GMA/TEGDMA na različitim metalnim podlogama
(Savez inženjera i tehničara Srbije, Beograd, 2018)
The subject of this study is the quantitative adhesion of a UV-curing composite film based on Bis-GMA (Bisphenol A glycidylmethacrylate) / TEGDMA (triethylene glycol dimethacrylate) as a matrix and particles doped with ...
Sorption of textile dyes from textile wastewater by chitosan-based hydrogel / Sorpcija boja za tekstil iz tekstilnih otpadnih voda pomoću hidrogela na bazi hitozana
(Savez inženjera i tehničara Srbije, Beograd, 2018)
With the excessive risks that are present in today's environment, it is of great importance to treat wastewaters before their discharge in water streams. One of the everyday challenges is design of a low-cost and environmentally ...
The impact of wood fiber surface modification on physical properties of wood-polymer composites / Uticaj modifikacije površine vlakana drveta na mehanička svojstva kompozita polimer-drvo
(Savez inženjera i tehničara Srbije, Beograd, 2016)
In this paper, the impact of wood fiber surface modification on mechanical properties of poly-(methyl methacrylate)(PMMA)-wood composite was examined. FTIR analysis has shown that the wood fiber surface modification was ...
Impact testing with controlled energy of multiaxial aramid fabrics with various types of reinforcement / Ispitivanje udarima kontrolisane energije multiaksijalnih aramidnih lamina sa različitim tipovima ojačanja
(Savez inženjera i tehničara Srbije, Beograd, 2015)
The physical and mechanical properties of the six samples of polyurethane/p-aramid multiaxial fabric forms (Kolon fabrics) were analyzed by high speed impact tester. The samples were impregnated with 10 wt.% poly (vinyl ...
Innovative solutions for the extraction of technology metals from complex primary and secondary raw materials / Inovativna rešenja u ekstraktivnoj metalurgiji kompleksnih primarnih i sekundarnih sirovina
(Savez inženjera i tehničara Srbije, Beograd, 2016)
Presented compilation of scientific, theoretical and experimental results, promotes an innovative synergy of various metals and industrial activities in metallurgy, resulting in profitable transformation of byproducts and ...
Mehanička svojstva hibridnog kompozita UHMWPE/EVA ojačanog vlaknima dobijenim elektropredenjem / Mechanical properties of UHMWPE/EVA hybrid composite reinforced with fibers obtained by electrospinning
(Savez inženjera i tehničara Srbije, 2018)
Aluminijum oksidna (Al2O3) nanovlakna pripremljena su iz vodenog rastvora aluminijum hlorohidrata/poli(vinil alkohola) (PVA) korišćenjem tehnike elektropredenja. Maseni odnos aluminijum hlorohidrata/PVA bio je 5:1. Nakon ...
Influence of whey proteins addition on mechanical stability of biopolymer beads with immobilized probiotics / Uticaj dodatka proteina surutke na mehaničku stabilnost biopolimernih nosača sa imobilisanim probioticima
(Savez inženjera i tehničara Srbije, Beograd, 2015)
Biopolymer carriers are widely used for immobilization of the bioactive compounds and different type of the cells. The aim of this study was to analyze influence of whey proteins addition on mechanical strength of Ca-alginate ...
Optimization of the process of calcium-carbonate dispersion stabilization for paper industry needs / Proces dobijanja stabilne disperzije kalcijum-karbonata za potrebe papirne industije
(Savez inženjera i tehničara Srbije, Beograd, 2018)
This paper presents the optimized technological process for obtaining stable calcium carbonate dispersion (CaCO3) in accordance to the standard prescribed in the paper industry. The reason for using CaCO3 in paper production ...
Examination of mechanical properties of acrilyc composite materials with different AL2O3 reinforcement by brazil test / Ispitivanje mehaničkih svojstava akrilatnih kompozitnih materijala sa različitim AL2O3 ojačanjima brazilskim testom
(Savez inženjera i tehničara Srbije, Beograd, 2019)
Composite materials based on UV-curing acrylates and various alumina-based reinforcements represent material that is suitable for the use in dentistry, but also in other areas. Composites were made using four different ...