Претраживање
Приказ резултата 21-30 од 56
Solubility in K+-Na+-Mg (4) (2-) aqueous solution at T=298.15 K
(Maik Nauka/Interperiodica/Springer, New York, 2013)
In the salt solubility predictions for K+-Na+-Mg (4) (2-) aqueous solution the treatment of thermodynamic data of three-component systems at T = 298.15 K involved the application of the Extended Pitzer's ion-interaction ...
Leaching properties of secondary lead slag stabilized/solidified with cement and selected additives
(Environment Protection Engineering, 2013)
Sodium lead slag, generated during secondary lead production, is characterized as hazardous waste. The aim of the study was to investigate leaching mechanism and behaviour of lead and arsenic from sodium lead slag previously ...
Diffusion of polyphenols from alginate, alginate/chitosan, and alginate/inulin particles
(Wiley, Hoboken, 2019)
Thymus serpyllum L (thyme) aqueous extract was encapsulated within three different types of particles. Thus, electrostatic extrusion was applied to obtain alginate, alginate/chitosan, and alginate/inulin particles with ...
Influence of picosecond laser pulses on the microstructure of austenitic materials
(Springer, New York, 2011)
We investigate samples of austenitic materials - stainless steel and iron-based superalloy - which are widely used at high temperatures and pressures. The samples were exposed to Nd(3+):YAG laser pulses with a wavelength ...
The effect of annealing temperatures on magnetic and electric properties of electrodeposited Ni85,3Fe10,6W1,4Cu2,2 alloy
(Natl Inst Optoelectronics, Bucharest-Magurele, 2014)
Ni-85,Ni-8 Fe-10,Fe-6 W-1,W-4 Cu-2,Cu-2 alloy powder consisting of an amorphous matrix and nanocrystals of an FCC solid solution of Fe, W and Cu in nickel was produced by electrodeposition. Heating the pressed powder sample ...
Electrospun Poly(vinylbutyral)/silica Composite Fibres for Impregnation of Aramid Fabrics
(Materiale Plastice, 2014)
The poly (vinyl butyral)/silica (PVB/SiO2) composite fibers were produced by the electrospinning process. The experiments were performed with the PVB solution in concentration of 10 wt.% where ethanol was used as the ...
Antimicrobial and Photocatalytic Abilities of Ag2CO3 Nano-Rods
(Wiley-VCH Verlag Gmbh, Weinheim, 2017)
The rod-like Ag2CO3 particles (2-4 3 0.3-0.6 mm, length 3 diameter) were synthesized in water by the precipitation reaction between AgNO3 and NaHCO3 in the presence of polyvinylpyrrolidone. The X-ray diffraction analysis ...
Effects of caraway and juniper essential oils on aflatoxigenic fungi growth and aflatoxins secretion in polenta
(Wiley, Hoboken, 2019)
Inhibitory activity of caraway and juniper essential oils was tested against two aflatoxigenic strains (Aspergillus flavus-four isolates and Aspergillus parasiticus-one isolate) using the method of agar plates. A. flavus ...
Surface-modified TiO2 powders with phenol derivatives: A comparative DFT and experimental study
(Elsevier, Amsterdam, 2017)
The charge transfer complex formation between TiO2 powder and variety of phenol derivatives (phenol, 4-nitrophenol, 4-bromophenol, 4-tert-butylphenol, hydroquinone) was achieved. The red-shift of optical absorption was ...
Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition
(Carl Hanser Verlag, 2018)
Pulse-reverse power modes are used in galvanotechniques in order to obtain coatings with better characteristics in terms of gloss, adhesion, tracking sharp edges and uniform distribution of deposits on complex shape objects, ...