Претраживање
Приказ резултата 31-40 од 71
Leaching properties of secondary lead slag stabilized/solidified with cement and selected additives
(Environment Protection Engineering, 2013)
Sodium lead slag, generated during secondary lead production, is characterized as hazardous waste. The aim of the study was to investigate leaching mechanism and behaviour of lead and arsenic from sodium lead slag previously ...
Influence of picosecond laser pulses on the microstructure of austenitic materials
(Springer, New York, 2011)
We investigate samples of austenitic materials - stainless steel and iron-based superalloy - which are widely used at high temperatures and pressures. The samples were exposed to Nd(3+):YAG laser pulses with a wavelength ...
Electrospun Poly(vinylbutyral)/silica Composite Fibres for Impregnation of Aramid Fabrics
(Materiale Plastice, 2014)
The poly (vinyl butyral)/silica (PVB/SiO2) composite fibers were produced by the electrospinning process. The experiments were performed with the PVB solution in concentration of 10 wt.% where ethanol was used as the ...
Isopiestic Determination of the Osmotic and Activity Coefficients of the {yNa(2)HPO(4) + (1-y)K2HPO4}(aq) System at T=298.15 K
(Springer/Plenum Publishers, New York, 2016)
Isopiestic measurements have been made for aqueous mixtures of Na2HPO4 and K2HPO4 at T = (298.15 +/- 0.01) K, at Na2HPO4 ionic strength fractions y = (0.2023, 0.4060, 0.6027, 0.8007, and 1), using KCl(aq) as the reference ...
Differences in the mode of thermomechanical processing between white gold alloys to produce semi-finished products
(Bulgarian Acad Science, Sofia, 2015)
The results of the investigation of the reduction degree on the hardness of a gold sample with chemical composition Au58,5Ag15Cu9,5Ni9Zn5Pd3 for old white gold alloy and Au58,5Ag18Cu10,5Ga8Zn5 (wt %) for new white gold ...
Solidified structure and leaching properties of metallurgical wastewater treatment sludge after solidification/stabilization process
(Taylor & Francis Inc, Philadelphia, 2016)
The presented study investigates solidification/stabilization process of hazardous heavy metals/arsenic sludge, generated after the treatment of the wastewater from a primary copper smelter. Fly ash and fly ash with addition ...
Raman spectroscopy study of anodic film on Ag43Cu37Zn20 alloy
(Natl Inst Optoelectronics, Bucharest-Magurele, 2016)
The objective of this study was characterization of anodic film obtained when Ag43Cu37Zn20 alloy was treated electrochemically in 3.5% wt. NaCI under potentiostatic conditions. At the potential of +0.25 V a complex multilayer ...
Using scanning electron microscopy to characterise plum (prunus domestica l.) Genotypes
(Publ House Bulgarian Acad Sci, Sofia, 2020)
Pollen grain micromorphological characterisation of four plum (Prunus domestica L.) genotypes from two different breeding programmes (Fruit Research Institute, Serbia, and Hohenheim, Germany) was performed using scanning ...
Quantitative Structure-Retention Relationships Modeling and Multivariate Data Analysis of Lipophilicity Data of New Spirohydantoin Derivatives
(Akademiai Kiado Zrt, Budapest, 2016)
Modeling properties of newly synthesized compounds is important for both understanding their activity and predicting their interactions. This paper describes the evaluation of the lipophilicity of the newly synthesized ...
Antimicrobial Activity of Thiocarbohydrazones: Experimental Studies and Alignment-Independent 3D QSAR Models
(Wiley-VCH Verlag Gmbh, Weinheim, 2018)
Due to the rise of microbial strains resistant to conventional therapies, there is an urgent need for finding the new antimicrobial chemotypes. Heterocyclic compounds such as thiocarbohydrazones (TCHs) are able to interact ...