Search
Now showing items 51-60 of 71
CFD analysis of the influence of centrifugal separator geometry modification on the pulverized coal distribution at the burners
(Transactions of Famena, 2014)
This paper presents the results of 3D numerical flow simulation in the ventilation mill (VM) and air mixture channel (AMC) of Kostolac B power plant, where a centrifugal separator with adjustable blade angle is used. ...
Comparative Effects of Span 20 and Span 40 on Liposomes Release Properties
(Walter de Gruyter Gmbh, Berlin, 2017)
Liposomes are known as convenient carriers for a broad range of actives. The release rate of actives can be adjusted/controlled by the addition of different surfactants. The aim of this study was to compare the effects of ...
Structurally and surface-modified alumina particles as a reinforcement in polyester-based composites with an improved toughness
(Springer, New York, 2020)
Commercial gamma - Al2O3 particles, Al2O3 n, and synthesized Al2O3 doped with iron oxide (Al2O3 Fe) were used as reinforcements to enhance the toughness of an unsaturated polyester resin (UPR). Alumina modification with ...
A new method in designing compatibility and adhesion of EVA/PMMA blend by using EVA-g-PMMA with controlled graft chain length
(Springer, Dordrecht, 2018)
Atom transfer free radical polymerization (ATRP) was employed in a synthesis of graft polymer EVA-g-PMMAwith controlled length of side PMMA chains. Three steps of synthesis: partial hydrolysis of EVA, esterification with ...
Modelling, simulation and optimisation of pulse-reverse regime of copper, silver and gold electrodeposition
(Carl Hanser Verlag, 2018)
Pulse-reverse power modes are used in galvanotechniques in order to obtain coatings with better characteristics in terms of gloss, adhesion, tracking sharp edges and uniform distribution of deposits on complex shape objects, ...
The effect of CaO and MgO addition and cooling rate on stability of slag obtained after jarosite and neutral leaching residue treatment in the Waelz process
(Oficyna Wydawnicza Politechniki Wroclawskiej, Wroclaw, 2018)
Jarosite and neutral leaching residue (NLR) are the greatest environmental problems of hydrometallurgical zinc production due to their high quantity and hazardous content. Pyrometallurgical processes, such as the Waelz ...
Origin of the Intrinsic Coercivity Field Variations of ε-Fe2O3
(Russian Journal of Physical Chemistry A, 2019)
ε-Fe2O3 phase is recognized as an attractive material, in both technological and scientific point of view, since it can achieve very high room-temperature coercivity (10–20 kOe). In this paper, multi-phase samples Fe2O3/SiO2 ...
Origin of the Intrinsic Coercivity Field Variations and Magnetic Study of ε-Fe2O3
(Russian Journal of Physical Chemistry A, 2019)
Origin of the intrinsic coercivity field variations observed by hysteretic measurements established by Nikolic et al. was investigated in detail by ZFC/FC measurements. In this study, magnetic behavior of the samples is ...
Characterisation of biomedical titanium layers deposited by a vacuum plasma spray process
(Materiali in Tehnologije, 2021)
In this paper we will describe the process of the deposition of thick layers of VPS-Ti coating, which is used as a bonding layer for the upper porous Ti coatings on implant substrates. In order to deposit the powder, we ...
Experimental Investigation of Microstructure and Phase Transitions in Ag-Cu-Zn Brazing Alloys
(Springer, 2018)
Microstructure and phase transitions of selected brazing alloys from the Ag-Cu-Zn ternary system were investigated. Four ternary alloys with silver content in the compositional range from 25 to 60 wt.% were studied using ...