Претраживање
Приказ резултата 1-10 од 16
Solubility in K+-Na+-Mg (4) (2-) aqueous solution at T=298.15 K
(Maik Nauka/Interperiodica/Springer, New York, 2013)
In the salt solubility predictions for K+-Na+-Mg (4) (2-) aqueous solution the treatment of thermodynamic data of three-component systems at T = 298.15 K involved the application of the Extended Pitzer's ion-interaction ...
Leaching properties of secondary lead slag stabilized/solidified with cement and selected additives
(Environment Protection Engineering, 2013)
Sodium lead slag, generated during secondary lead production, is characterized as hazardous waste. The aim of the study was to investigate leaching mechanism and behaviour of lead and arsenic from sodium lead slag previously ...
Adsorption of azo dyes on polymer materials / Adsorpcija azo boja na polimernim materijalima
(Association of Chemical Engineers of Serbia, 2013)
The use of polymeric adsorbents for the removal of azo dyes from solution has been reviewed. Adsorption techniques are widely used to remove certain classes of pollutants from waters, especially those which are not easily ...
Removal of copper(II) ion from aqueous solution by high-porosity activated carbon
(Water Research Commission, Pretoria, 2013)
The removal of copper(II) ion from aqueous solution by the granular activated carbon, obtained from hazelnut shells (ACHS) (Corylus avellana L. var. lunga istriana), was investigated. The ACHS was prepared from ground dried ...
Development of RuO2/TiO2 titanium anodes and a device for in situ active chlorine generation / Razvoj titanskih RuO2/TiO2 anoda i uređaja za in situ proizvodnju aktivnog hlora
(Association of Chemical Engineers of Serbia, 2013)
Chlorine is used worldwide for water disinfection purposes. However, due to its toxicity the EU has imposed a set of standards that must be applied when transporting and storing chlorine. In Serbia, numerous studies have ...
VOC emission from oil refinery and petrochemical wastewater treatment plant estimation / Procena emisija lakoisparljivih organskih jedinjenja iz postrojenja za primarni tretman otpadnih voda rafinerijskih i petrohemijskih postrojenja
(Association of Chemical Engineers of Serbia, 2013)
As a consequence of environmental legislation improvement in Serbia for industrial producers, especially future holders of Integrated Pollution Prevention Control (IPPC) license, it is necessary to report annually on ...
Estimation of evaporative losses during storage of crude oil and petroleum products / Kvantifikacija evaporativnih gubitaka nafte i naftnih derivata tokom skladištenja
(Association of Chemical Engineers of Serbia, 2013)
Storage of crude oil and petroleum products inevitably leads to evaporative losses. Those losses are important for the industrial plants mass balances, as well as for the environmental protection. In this paper, estimation ...
Recycling of Precious Metals from E-scrap
(Jihad Daneshgahi, Tehran, 2013)
Recovery of gold and other valuable metals from electronic scrap involves a complex metallurgical flow sheet and requires state-of-the-art recovery technologies that are available in large-scale, integrated smelter and ...
Impermeable layers in landfill design / Prilog projektovanju vodonepropusnih slojeva deponija
(Association of Chemical Engineers of Serbia, 2013)
Landfills are complex systems that could potentially contaminate the environment. This needs to be prevented by providing impermeability during the landfill design. In this aim, the related regulations should be followed ...
The influence of the size and surface modification of TIO2 nanoparticles on the rheological properties of alkyd resin / Uticaj veličine nanočestica TIO2 i njihove površinske modifikacije na reološka svojstva alkidne smole
(Association of Chemical Engineers of Serbia, 2013)
Spherical TiO2 particles of different size were dispersed in alkyd resin based on soybean oil. Four samples of TiO2 particles were used, three commercial and one obtained by acid catalyzed hydrolysis of titanium ...