Претраживање
Приказ резултата 1-10 од 22
Poly(methyl methacrylate) denture base materials modified with ditetrahydrofurfuryl itaconate: Significant applicative properties
(Srpsko hemijsko društvo, Beograd, 2015)
The aim of this work was to examine the possibility of modification of commercial denture base materials with itaconic acid esters, in order to obtain materials with lower toxicity and higher biocompatibility. Despite their ...
Photocatalytic Performance of Carbon Monolith/TiO2 Composite
(Hindawi Ltd, London, 2015)
The new and simple approach for deposition of catalytically active TiO2 coating on carbon monolith (CM) carrier was presented. CM photocatalysts were impregnated with TiO2 using titanium solution and thermal treatment, and ...
Stress corrosion cracking resistance of aluminum alloy 7000 series after two-step aging / Otpornost aluminijumske legure serije 7000 prema naponskoj koroziji posle dvostepenog termičkog taloženja
(Association of the Chemical Engineers of Serbia, 2015)
The effect of one-step and a new (short) two-step aging process on the resistance to stress corrosion cracking of an aluminum alloy 7000 series was investigated, using slow strain rate test and fracture mechanics method. ...
Differences in the mode of thermomechanical processing between white gold alloys to produce semi-finished products
(Bulgarian Acad Science, Sofia, 2015)
The results of the investigation of the reduction degree on the hardness of a gold sample with chemical composition Au58,5Ag15Cu9,5Ni9Zn5Pd3 for old white gold alloy and Au58,5Ag18Cu10,5Ga8Zn5 (wt %) for new white gold ...
Thermodynamics of mixed and pure aqueous solutions of K2HPO4 at T=298.15 K
(Maik Nauka/Interperiodica/Springer, New York, 2015)
Experimental results on isopiestic measurements for three ternary aqueous solutions of K2HPO4 with KCl, KBr, and KNO3 at T = 298.15 K were modeled with the Clegg-Pitzer-Brimblecombe equation based on mole-fraction-composition ...
Pulsed laser deposition method for fabrication of cds/tio2 and pbs photoelectrodes for solar energy application
(Inst Materials Physics, Bucharest, 2015)
Titanium films sputtered on FTO glass were used for obtaining highly oriented titania nanotubes via anodization technique. Then, pulsed laser deposition of CdS was carried out for sensitizing of similar to 60 nm wide titania ...
Arsenic in Agricultural Soils of a Historically Mined and Industrial Region of Southern Serbia and Northern Kosovo: Bioavailability and Uptake by Plants Species Zea mays L. and Solanum tuberosum L.
(Taylor & Francis Inc, Philadelphia, 2015)
This article reports the results of a study focused on the presence and bioavailability of arsenic in agricultural soil in the mining and industrial regions of northern Kosovo and southern Serbia, as well as uptake and ...
Antibacterial activity of copper-containing clinoptilolite/PVC composites toward clinical isolate of Acinetobacter baumannii
(Srpsko hemijsko društvo, Beograd, 2015)
The multidrug-resistant bacteria Acinetobacter baumannii cause serious hospital infections. Commercial poly(vinyl chloride) (PVC) used for endotracheal tubes was modified in order to obtain a composite with an antibacterial ...
The Mechanical Properties of a Poly(methyl methacrylate) Denture Base Material Modified with Dimethyl Itaconate and Di-n-butyl Itaconate
(Hindawi Ltd, London, 2015)
This study investigates a wide range of clinically relevant mechanical properties of poly(methyl methacrylate) (PMMA) denture base materials modified with di-methyl itaconate (DMI) and di-n-butyl itaconate (DBI) in order ...
Did the Iceman Know Better? Screening of the Medicinal Properties of the Birch Polypore Medicinal Mushroom, Piptoporus betulinus (Higher Basidiomycetes)
(Begell House Inc, Danbury, 2015)
The birch polypore Piptoporus betulinus was among two mushrooms that were found in the Iceman's bag. Recent studies indicated that P. betulinus was probably used as a religious and medicinal item. In order to examine the ...