Претраживање
Приказ резултата 1-10 од 11
Denture composite reinforced with short polyethylene terephthalate fibers
(John Wiley and Sons Inc., 2022)
Polymer matrix composite materials have found application in dentistry because of good mechanical properties, aesthetic, easy processing, and possibilities of the repair. Acrylates are materials used to make and repair ...
Effect of the Modified Silica Nanofiller on the Mechanical Properties of Unsaturated Polyester Resins Based on Recycled Polyethylene Terephthalate
(Wiley, Hoboken, 2017)
Unsaturated polyester resin (UPe)-based nanocomposites and fumed silica Aerosil R812S, R805 and R816, and R200 modified with phenyl terminal group, R200NPh, were prepared. UPe resins were synthesized from maleic anhydride ...
Dimethyl Itaconate Modified PMMA - Alumina Fillers Composites With Improved Mechanical Properties
(Wiley, Hoboken, 2019)
PMMA poly(methyl methacrylate) has a large spectrum of uses as bone cements, in dentistry as denture base materials and other industrial applications. One of the main drawbacks of these materials is the residual monomer ...
Preparation and Properties of Short Oil Alkyd Resin/TiO2 Nanocomposites Based on Surface Modified TiO2 Nanoparticles
(Wiley, Hoboken, 2018)
Alkyd resin/TiO2 nanocomposites (NC) were prepared from short oil alkyd resin and TiO2 nanoparticles (NPs) surface modified with in situ formed imine ligand, based on 3,4-dihydroxybenzaldehyde and oleylamine, or with three ...
Effects of oxidized/treated non-metallic fillers obtained from waste printed circuit boards on mechanical properties and shrinkage of unsaturated polyester-based composites
(Wiley, Hoboken, 2019)
The investigation of the influence of acid/base treatment and addition level of non-metallic fractions (NMFs), obtained by processing of printed circuit boards, on the mechanical properties and shrinkage of unsaturated ...
Photocatalytic Degradation of C. I. Acid Orange 7 by TiO2 Nanoparticles Immobilized onto/ into Chitosan- Based Hydrogel
(Wiley, Hoboken, 2014)
Photocatalytic degradation of dye C.I. Acid Orange 7 in aqueous solution using TiO2/hydrogel nanocomposite under solar light simulating source was studied. Hydrogel based on chitosan, itaconic and methacrylic acid was ...
Silver/Poly(N-vinyl-2-pyrrolidone) Hydrogel Nanocomposites Obtained by Electrochemical Synthesis of Silver Nanoparticles Inside the Polymer Hydrogel Aimed for Biomedical Applications
(Wiley, Hoboken, 2014)
Silver nanoparticles were produced inside a poly(N-vinyl-2-pyrrolidone) hydrogel (PVP) by an innovative method based on the electrochemical reduction of Ag+ ions within the swollen PVP hydrogel. UV-visible spectroscopy ...
Mechanical properties of acrylate matrix composite reinforced with manganese-aluminum layered double hydroxide
(John Wiley and Sons Inc., 2023)
Acrylate polymers are used in several applications such as dentistry, medicine, and industry. The modification of their properties using the reinforcement is of key importance for the possible applications. Layered double ...
The effect of natural modifiers for starch hydrophobization on performance of composite based on ethylene acrylic acid copolymer
(Wiley, Hoboken, 2021)
As a renewable resource, starch is considered to be fully biodegradable and nonpolluting to the environment but the hygroscopicity of starch is the main disadvantage for wider applicability in the production of a polymer-based ...
Design of halloysite modification for improvement of mechanical properties of the epoxy based nanocomposites
(Polymer Composites, 2021)
In this study, halloysite nanotubes (HNT) were modified by: 3-glycidyloxypropyltrimethoxysilane (GLYMO), 3-aminopropyltrimethoxysilane (APTES), and 2,2-Bis[4-(glycidyloxy) phenyl] propane (DGEBA), and incorporated in the ...