Претраживање
Приказ резултата 1-10 од 348
The analysis of forming PVB-SiO2 nanocomposite fibers by the electrospinning process / Analiza formiranja PVB-SiO2 nanokompozitnih vlakana pomoću elektrospining procesa
(Military Technical Institute, Belgrade, 2011)
The poly (vinyl butyral)-silica (PVB-SiO2) nanofibers were obtained by the electrospinning process. The experiments were carried out with PVB solution in concentration of 10 wt.% where ethanol was used as the solvent. The ...
Sorption of Cu2+ and Co2+ from aqueous solutions onto sepiolite: An equilibrium, kinetic and thermodynamic study / Sorpcija jona bakra i kobalta iz vodenih rastvora na sepiolitu, ispitivanje ravnoteže, kinetike i termodinamike sorpcije
(Serbian Chemical Society, Belgrade, 2011)
The efficiency of natural sepiolite for the removal of Cu2+ and Co2+ from aqueous solution was determined using the batch method. The sorption experiments were performed as a function of the initial metal concentration, ...
Merenje vibracija mrežom bežičnih senzora
(Savez inženjera i tehničara Srbije, Beograd, 2012)
Nedestruktivno praćenje stanja građevinskih objekata se bazira na merenju vibracija objekata pri dinamičkim ispitivanjima ili u toku njihove eksploatacije. U ovu svrhu se sve više koriste mreže bežičnih senzora koje čine ...
Micropropagation of sour cherry 'Čačanski Rubin' (Prunus cerasus L.) / Mikropropagacija sorte višnje Čačanski rubin (Prunus cerasus L.)
(Naučno voćarsko društvo Srbije, Čačak, 2013)
The paper describes the protocol for micropropagation of sour cherry 'Čačanski Rubin' (Prunus cerasus L.) bred at the Fruit Research Institute in Čačak. Aiming at developing efficient protocol for micropropagation of this ...
Electrochemical impedance spectroscopy of a silver-doped hydroxyapatite coating in simulated body fluid used as a corrosive agent / Spektroskopija elektrohemijske impedancije prevlake hidroksiapatita dopirane srebrom u simuliranoj telesnoj tečnosti korišćenoj kao korozioni agens
(Serbian Chemical Society, Belgrade, 2012)
Titanium is a key biomedical material due to its good biocompatibility, mechanical properties and corrosion stability, but infections at the implantation site still pose a serious threat. One approach to prevent infection ...
Dynamic mechanical properties of aramid fabrics impregnated with multiwalled carbon nanotubes / Dinamičko mehanička svojstva aramidnih lamina impregnisanih sa višeslojnim ugljeničnim nanocevima
(Engineering Society for Corrosion, Belgrade, Serbia, 2013)
Carbon nanotubes (CNT) represent allotropes of carbon with a cylindrical nanostructure. In multiwalled carbon nanotubes (MWCNT), graphitic layers make up concentric tubes. The multiwalled nanotubes length in our research ...
Conceptual design for treatment of mining and metallurgical wastewaters which contains arsenic and antimony
(Association of Metallurgical Engineers of Serbia, 2012)
This paper presents a preliminary design for treatment of mining and metallurgical wastewaters (MMW) from the basin of antimony 'Zajača', which contains high concentrations of arsenic and antimony. MMW have been investigated ...
Structural and mechanical properties of different hard welded coatings for impact plate for ventilation mill
(SUDURA Publishing House, 2011)
Dynamic mechanical properties of aramid fabrics impregnated with carbon nanotube/poly (vinyl butyral)/ethanol solution
(Association of Metallurgical Engineers of Serbia, 2013)
In this study six samples of polyurethane/p-aramid multiaxial fabric forms (Colon fabrics) were coated with 10 wt.% poly (vinyl butyral) (PVB)/ethanol solution with the addition of multiwalled carbon nanotubes (MWCNT). The ...
The impact of manufacturing process on the content of hard triglycerides, hardness and thermal properties of milk chocolate
(Savez hemijskih inženjera, Beograd, 2012)
The rheological and physical properties of the chocolate mass depend on the ingredient composition as well as the manufacturing process. For the purpose of this work, a milk chocolate mass of identical composition and raw ...