Recycled Wool Based Non-Woven Material as Sorbent for Heavy Metals
Нема приказа
Аутори
Radetić, MajaJocić, Dragan
Jovančić, Petar
Rajaković, Ljubinka
Potkonjak, Branislav
Petrović, Zoran Lj.
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The aim of this study was to investigate the sorption properties of recycled wool based non-woven material for heavy metal ions. To improve sorption properties wool material was treated with air low-temperature plasma (LTP) and/or biopolymer chitosan (CHT). The rate and extent of uptake of various metal cations (Pb+2, Cu+2, Zn+2) by wool, kinetics of adsorption, as well as the influence of concentration, pH and temperature on the sorption process were determined. It was found that wool even as a recycled material efficiently binds metal cations in all investigated cases. Recycled non-woven wool material is good sorbent for Pb+2 ions and it seems that it does not need any modification to improve this property. The modification of the material with LTP and/or CHT does not pass over 5 % of metal uptake improvement. Sorption properties for Cu+2 Ions improve about 10 % with LTP+CHT modification of the sorbent material, but metal salt solution still contains considerable amount of residual m...etal in solution (>30 %) even alter 24 hours of adsorption. The improvement in Zn+2 ions sorption is the most obvious with sorbent material modification as the LTP+CHT modified wool adsorbs 84 % more Zn+2 Ions than unmodified sorbent after 24 hours. The percentage of Zn+2 ions remaining in the solution is still considerable, but it improves from 72 % to 48 %. The further improvement in lead and copper sorption properties could be obtained by increasing pH and temperature of metal salt solution. The results indicate that the investigated non-woven recycled wool based sorbent material is potentially useful low-cost substrate for removing heavy metals from industrial effluents and other water sources.
Извор:
Proceedings of the 1st AUTEX Conference-Technical Textiles: Designing Textiles for Technical Applications, 26-29 June 2001, Povoa de Varzim, Portugal, 2001, 1, 414-420Издавач:
- University of Minho, Portugal
Институција/група
Tehnološko-metalurški fakultetTY - CONF AU - Radetić, Maja AU - Jocić, Dragan AU - Jovančić, Petar AU - Rajaković, Ljubinka AU - Potkonjak, Branislav AU - Petrović, Zoran Lj. PY - 2001 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/6518 AB - The aim of this study was to investigate the sorption properties of recycled wool based non-woven material for heavy metal ions. To improve sorption properties wool material was treated with air low-temperature plasma (LTP) and/or biopolymer chitosan (CHT). The rate and extent of uptake of various metal cations (Pb+2, Cu+2, Zn+2) by wool, kinetics of adsorption, as well as the influence of concentration, pH and temperature on the sorption process were determined. It was found that wool even as a recycled material efficiently binds metal cations in all investigated cases. Recycled non-woven wool material is good sorbent for Pb+2 ions and it seems that it does not need any modification to improve this property. The modification of the material with LTP and/or CHT does not pass over 5 % of metal uptake improvement. Sorption properties for Cu+2 Ions improve about 10 % with LTP+CHT modification of the sorbent material, but metal salt solution still contains considerable amount of residual metal in solution (>30 %) even alter 24 hours of adsorption. The improvement in Zn+2 ions sorption is the most obvious with sorbent material modification as the LTP+CHT modified wool adsorbs 84 % more Zn+2 Ions than unmodified sorbent after 24 hours. The percentage of Zn+2 ions remaining in the solution is still considerable, but it improves from 72 % to 48 %. The further improvement in lead and copper sorption properties could be obtained by increasing pH and temperature of metal salt solution. The results indicate that the investigated non-woven recycled wool based sorbent material is potentially useful low-cost substrate for removing heavy metals from industrial effluents and other water sources. PB - University of Minho, Portugal C3 - Proceedings of the 1st AUTEX Conference-Technical Textiles: Designing Textiles for Technical Applications, 26-29 June 2001, Povoa de Varzim, Portugal T1 - Recycled Wool Based Non-Woven Material as Sorbent for Heavy Metals EP - 420 SP - 414 VL - 1 UR - https://hdl.handle.net/21.15107/rcub_technorep_6518 ER -
@conference{ author = "Radetić, Maja and Jocić, Dragan and Jovančić, Petar and Rajaković, Ljubinka and Potkonjak, Branislav and Petrović, Zoran Lj.", year = "2001", abstract = "The aim of this study was to investigate the sorption properties of recycled wool based non-woven material for heavy metal ions. To improve sorption properties wool material was treated with air low-temperature plasma (LTP) and/or biopolymer chitosan (CHT). The rate and extent of uptake of various metal cations (Pb+2, Cu+2, Zn+2) by wool, kinetics of adsorption, as well as the influence of concentration, pH and temperature on the sorption process were determined. It was found that wool even as a recycled material efficiently binds metal cations in all investigated cases. Recycled non-woven wool material is good sorbent for Pb+2 ions and it seems that it does not need any modification to improve this property. The modification of the material with LTP and/or CHT does not pass over 5 % of metal uptake improvement. Sorption properties for Cu+2 Ions improve about 10 % with LTP+CHT modification of the sorbent material, but metal salt solution still contains considerable amount of residual metal in solution (>30 %) even alter 24 hours of adsorption. The improvement in Zn+2 ions sorption is the most obvious with sorbent material modification as the LTP+CHT modified wool adsorbs 84 % more Zn+2 Ions than unmodified sorbent after 24 hours. The percentage of Zn+2 ions remaining in the solution is still considerable, but it improves from 72 % to 48 %. The further improvement in lead and copper sorption properties could be obtained by increasing pH and temperature of metal salt solution. The results indicate that the investigated non-woven recycled wool based sorbent material is potentially useful low-cost substrate for removing heavy metals from industrial effluents and other water sources.", publisher = "University of Minho, Portugal", journal = "Proceedings of the 1st AUTEX Conference-Technical Textiles: Designing Textiles for Technical Applications, 26-29 June 2001, Povoa de Varzim, Portugal", title = "Recycled Wool Based Non-Woven Material as Sorbent for Heavy Metals", pages = "420-414", volume = "1", url = "https://hdl.handle.net/21.15107/rcub_technorep_6518" }
Radetić, M., Jocić, D., Jovančić, P., Rajaković, L., Potkonjak, B.,& Petrović, Z. Lj.. (2001). Recycled Wool Based Non-Woven Material as Sorbent for Heavy Metals. in Proceedings of the 1st AUTEX Conference-Technical Textiles: Designing Textiles for Technical Applications, 26-29 June 2001, Povoa de Varzim, Portugal University of Minho, Portugal., 1, 414-420. https://hdl.handle.net/21.15107/rcub_technorep_6518
Radetić M, Jocić D, Jovančić P, Rajaković L, Potkonjak B, Petrović ZL. Recycled Wool Based Non-Woven Material as Sorbent for Heavy Metals. in Proceedings of the 1st AUTEX Conference-Technical Textiles: Designing Textiles for Technical Applications, 26-29 June 2001, Povoa de Varzim, Portugal. 2001;1:414-420. https://hdl.handle.net/21.15107/rcub_technorep_6518 .
Radetić, Maja, Jocić, Dragan, Jovančić, Petar, Rajaković, Ljubinka, Potkonjak, Branislav, Petrović, Zoran Lj., "Recycled Wool Based Non-Woven Material as Sorbent for Heavy Metals" in Proceedings of the 1st AUTEX Conference-Technical Textiles: Designing Textiles for Technical Applications, 26-29 June 2001, Povoa de Varzim, Portugal, 1 (2001):414-420, https://hdl.handle.net/21.15107/rcub_technorep_6518 .