Influence of Cold Rolling and Annealing on the Mechanical and Corrosion Properties of an AA5182 Al-Mg Alloy
Само за регистроване кориснике
2023
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In this study we investigated the effect of cold rolling reductions and different annealing conditions, on the mechanical properties and corrosion resistance of an AA5182 type Al-Mg alloy. Material was industrially produced and supplied as hot rolled 12 mm thick plates. Further lab-processing included cold rolling with 40-85% reduction in thickness, and 2h of annealing in the range of temperatures from 300-350°C. Annealed specimens were used for room temperature tensile testing while corrosion testing was performed on the annealed and sensitized specimens. Intergranular corrosion (IGC) susceptibility was determined by nitric acid mass loss test (NAMLT) for the selected states.
The results showed that corrosion resistance, tensile strength and yield point elongation were mostly affected by a degree of cold deformation. It was found that increasing in cold rolling reduction from 40-85% before annealing causes an improved strength level due to grain size refinement. However, yield point... elongation became more pronounced and a tendency towards Lüdering as undesirable surface appearance was increased. NAMLT testing showed that the material was corrosion resistant in as-annealed condition while it became susceptible to intergranular corrosion after sensitization treatment. IGC susceptibility of sensitized specimens increases with cold rolling reduction and a grain size refinement.
Кључне речи:
Al-Mg alloy / degree of deformation / strength / yield point elongation / intergranular corrosionИзвор:
Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023, 2023, 291-297Издавач:
- Belgrade : Association of Metallurgical Engineers of Serbia (AMES)
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200135 (Универзитет у Београду, Технолошко-металуршки факултет) (RS-MESTD-inst-2020-200135)
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200287 (Иновациони центар Технолошко-металуршког факултета у Београду доо) (RS-MESTD-inst-2020-200287)
Колекције
Институција/група
Tehnološko-metalurški fakultetTY - CONF AU - Popović, Miljana AU - Alil, Ana AU - Gligorijević, Bojan AU - Romhanji, Endre PY - 2023 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7295 AB - In this study we investigated the effect of cold rolling reductions and different annealing conditions, on the mechanical properties and corrosion resistance of an AA5182 type Al-Mg alloy. Material was industrially produced and supplied as hot rolled 12 mm thick plates. Further lab-processing included cold rolling with 40-85% reduction in thickness, and 2h of annealing in the range of temperatures from 300-350°C. Annealed specimens were used for room temperature tensile testing while corrosion testing was performed on the annealed and sensitized specimens. Intergranular corrosion (IGC) susceptibility was determined by nitric acid mass loss test (NAMLT) for the selected states. The results showed that corrosion resistance, tensile strength and yield point elongation were mostly affected by a degree of cold deformation. It was found that increasing in cold rolling reduction from 40-85% before annealing causes an improved strength level due to grain size refinement. However, yield point elongation became more pronounced and a tendency towards Lüdering as undesirable surface appearance was increased. NAMLT testing showed that the material was corrosion resistant in as-annealed condition while it became susceptible to intergranular corrosion after sensitization treatment. IGC susceptibility of sensitized specimens increases with cold rolling reduction and a grain size refinement. PB - Belgrade : Association of Metallurgical Engineers of Serbia (AMES) C3 - Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023 T1 - Influence of Cold Rolling and Annealing on the Mechanical and Corrosion Properties of an AA5182 Al-Mg Alloy EP - 297 SP - 291 UR - https://hdl.handle.net/21.15107/rcub_technorep_7295 ER -
@conference{ author = "Popović, Miljana and Alil, Ana and Gligorijević, Bojan and Romhanji, Endre", year = "2023", abstract = "In this study we investigated the effect of cold rolling reductions and different annealing conditions, on the mechanical properties and corrosion resistance of an AA5182 type Al-Mg alloy. Material was industrially produced and supplied as hot rolled 12 mm thick plates. Further lab-processing included cold rolling with 40-85% reduction in thickness, and 2h of annealing in the range of temperatures from 300-350°C. Annealed specimens were used for room temperature tensile testing while corrosion testing was performed on the annealed and sensitized specimens. Intergranular corrosion (IGC) susceptibility was determined by nitric acid mass loss test (NAMLT) for the selected states. The results showed that corrosion resistance, tensile strength and yield point elongation were mostly affected by a degree of cold deformation. It was found that increasing in cold rolling reduction from 40-85% before annealing causes an improved strength level due to grain size refinement. However, yield point elongation became more pronounced and a tendency towards Lüdering as undesirable surface appearance was increased. NAMLT testing showed that the material was corrosion resistant in as-annealed condition while it became susceptible to intergranular corrosion after sensitization treatment. IGC susceptibility of sensitized specimens increases with cold rolling reduction and a grain size refinement.", publisher = "Belgrade : Association of Metallurgical Engineers of Serbia (AMES)", journal = "Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023", title = "Influence of Cold Rolling and Annealing on the Mechanical and Corrosion Properties of an AA5182 Al-Mg Alloy", pages = "297-291", url = "https://hdl.handle.net/21.15107/rcub_technorep_7295" }
Popović, M., Alil, A., Gligorijević, B.,& Romhanji, E.. (2023). Influence of Cold Rolling and Annealing on the Mechanical and Corrosion Properties of an AA5182 Al-Mg Alloy. in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023 Belgrade : Association of Metallurgical Engineers of Serbia (AMES)., 291-297. https://hdl.handle.net/21.15107/rcub_technorep_7295
Popović M, Alil A, Gligorijević B, Romhanji E. Influence of Cold Rolling and Annealing on the Mechanical and Corrosion Properties of an AA5182 Al-Mg Alloy. in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023. 2023;:291-297. https://hdl.handle.net/21.15107/rcub_technorep_7295 .
Popović, Miljana, Alil, Ana, Gligorijević, Bojan, Romhanji, Endre, "Influence of Cold Rolling and Annealing on the Mechanical and Corrosion Properties of an AA5182 Al-Mg Alloy" in Congress Proceedings / 5th Metallurgical & Materials Engineering Congress of South-East Europe MME SEE Congress 2023, Trebinje, Bosnia and Herzegovina 7-10th June 2023 (2023):291-297, https://hdl.handle.net/21.15107/rcub_technorep_7295 .