Optimization of waste heat recovery via heat integration
Optimizacija rekuperacije toplote pomoću toplotne integracije
Само за регистроване кориснике
2015
Аутори
Zarić, Milana M.Stijepović, Mirko
Linke, Patrick
Kijevčanin, Mirjana
Stajić-Trošić, Jasna
Bugarski, Branko
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Fossil fuels are widely used to provide energy in major industrial sectors, while consumption of
fossil fuel leads to undesirable increases in greenhouse gas emissions, causing climate changes.
Because of it is important to use energy in more efficient way in order to reduce theneedofusing
fossil fuel. Heat recovery and reuse of waste heat is a promising approach to increase energy
efficiency, saving energy whichleadstoreduceddemands for fossil fuels.
The goal of this study is to minimize the fuel consumption by maximizing energy efficiency via
indirect heat integration of multiple processes in an industrial zone. Theproposedmodel is
applied on a case study, which consists of multiple plants,served by a centralized
utilitysystem,which provides required heat and power for processes.Theadvantage of the used
model is simplicity and its linear programming formulation (LP).
Fosilna goriva imaju veliku ulogu u obezbeđivanju potrebne energije u većini industrijskih sektora.
Potrošnja fosilnih goriva dovodi do neželjenog povećanja emisije gasova staklene bašte,
koji uzrokuju klimatske promene.Zbog potrebe da se smanji potrošnja fosilnih goriva,
rekuperacija otpadne toplote je pristup koji obećava povećanje energetske efikasnoti, jer se
energija štedi, što dovodi do manjih zahteva za potrošnju fosilnih goriva. Cilj ove studije je svođenje upotrebe fosilnih goriva na minimum, time što se
maksimizuje energetska efikasnost kroz indirektnu toplotnu integraciju. Predloženi model
toplotne integracije je primenjen na case studiju, kojapredstavlja industrijsku zonu sa više postrojenja.
Predpostavlja se da se industrijaska zona snabdeva centralizovani mutiliti sistemom,
koji obezbeđuje potrebnu količinu toplote i energije za sve procese. Prednost korišćenog modela je
jednostavnost i linearnost programske formulacije (LP programiranje).
Кључне речи:
heat recovery / energy efficiency / heat integration / LP formulation / rekuperacija toplote / energetska efikasnost / toplotna integracija / linearno programiranje (LP)Извор:
Knjiga radova = Proceedings / IV međunarodni kongres "Inženjerstvo, ekologija i materijali u procesnoj industriji", Jahorina, 04.03.- 06.03. 2015. = IV International Congress "Engineering, Ecology and Materials in the Processing Industry", 2015, 598-602Издавач:
- Zvornik : Tehnološki fakultet
Финансирање / пројекти:
- Развој нових инкапсулационих и ензимских технологија за производњу биокатализатора и биолошки активних компонената хране у циљу повећања њене конкурентности, квалитета и безбедности (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-46010)
Институција/група
Tehnološko-metalurški fakultetTY - CONF AU - Zarić, Milana M. AU - Stijepović, Mirko AU - Linke, Patrick AU - Kijevčanin, Mirjana AU - Stajić-Trošić, Jasna AU - Bugarski, Branko PY - 2015 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/7358 AB - Fossil fuels are widely used to provide energy in major industrial sectors, while consumption of fossil fuel leads to undesirable increases in greenhouse gas emissions, causing climate changes. Because of it is important to use energy in more efficient way in order to reduce theneedofusing fossil fuel. Heat recovery and reuse of waste heat is a promising approach to increase energy efficiency, saving energy whichleadstoreduceddemands for fossil fuels. The goal of this study is to minimize the fuel consumption by maximizing energy efficiency via indirect heat integration of multiple processes in an industrial zone. Theproposedmodel is applied on a case study, which consists of multiple plants,served by a centralized utilitysystem,which provides required heat and power for processes.Theadvantage of the used model is simplicity and its linear programming formulation (LP). AB - Fosilna goriva imaju veliku ulogu u obezbeđivanju potrebne energije u većini industrijskih sektora. Potrošnja fosilnih goriva dovodi do neželjenog povećanja emisije gasova staklene bašte, koji uzrokuju klimatske promene.Zbog potrebe da se smanji potrošnja fosilnih goriva, rekuperacija otpadne toplote je pristup koji obećava povećanje energetske efikasnoti, jer se energija štedi, što dovodi do manjih zahteva za potrošnju fosilnih goriva. Cilj ove studije je svođenje upotrebe fosilnih goriva na minimum, time što se maksimizuje energetska efikasnost kroz indirektnu toplotnu integraciju. Predloženi model toplotne integracije je primenjen na case studiju, kojapredstavlja industrijsku zonu sa više postrojenja. Predpostavlja se da se industrijaska zona snabdeva centralizovani mutiliti sistemom, koji obezbeđuje potrebnu količinu toplote i energije za sve procese. Prednost korišćenog modela je jednostavnost i linearnost programske formulacije (LP programiranje). PB - Zvornik : Tehnološki fakultet C3 - Knjiga radova = Proceedings / IV međunarodni kongres "Inženjerstvo, ekologija i materijali u procesnoj industriji", Jahorina, 04.03.- 06.03. 2015. = IV International Congress "Engineering, Ecology and Materials in the Processing Industry" T1 - Optimization of waste heat recovery via heat integration T1 - Optimizacija rekuperacije toplote pomoću toplotne integracije EP - 602 SP - 598 DO - 10.7251/EEMEN1501598Z ER -
@conference{ author = "Zarić, Milana M. and Stijepović, Mirko and Linke, Patrick and Kijevčanin, Mirjana and Stajić-Trošić, Jasna and Bugarski, Branko", year = "2015", abstract = "Fossil fuels are widely used to provide energy in major industrial sectors, while consumption of fossil fuel leads to undesirable increases in greenhouse gas emissions, causing climate changes. Because of it is important to use energy in more efficient way in order to reduce theneedofusing fossil fuel. Heat recovery and reuse of waste heat is a promising approach to increase energy efficiency, saving energy whichleadstoreduceddemands for fossil fuels. The goal of this study is to minimize the fuel consumption by maximizing energy efficiency via indirect heat integration of multiple processes in an industrial zone. Theproposedmodel is applied on a case study, which consists of multiple plants,served by a centralized utilitysystem,which provides required heat and power for processes.Theadvantage of the used model is simplicity and its linear programming formulation (LP)., Fosilna goriva imaju veliku ulogu u obezbeđivanju potrebne energije u većini industrijskih sektora. Potrošnja fosilnih goriva dovodi do neželjenog povećanja emisije gasova staklene bašte, koji uzrokuju klimatske promene.Zbog potrebe da se smanji potrošnja fosilnih goriva, rekuperacija otpadne toplote je pristup koji obećava povećanje energetske efikasnoti, jer se energija štedi, što dovodi do manjih zahteva za potrošnju fosilnih goriva. Cilj ove studije je svođenje upotrebe fosilnih goriva na minimum, time što se maksimizuje energetska efikasnost kroz indirektnu toplotnu integraciju. Predloženi model toplotne integracije je primenjen na case studiju, kojapredstavlja industrijsku zonu sa više postrojenja. Predpostavlja se da se industrijaska zona snabdeva centralizovani mutiliti sistemom, koji obezbeđuje potrebnu količinu toplote i energije za sve procese. Prednost korišćenog modela je jednostavnost i linearnost programske formulacije (LP programiranje).", publisher = "Zvornik : Tehnološki fakultet", journal = "Knjiga radova = Proceedings / IV međunarodni kongres "Inženjerstvo, ekologija i materijali u procesnoj industriji", Jahorina, 04.03.- 06.03. 2015. = IV International Congress "Engineering, Ecology and Materials in the Processing Industry"", title = "Optimization of waste heat recovery via heat integration, Optimizacija rekuperacije toplote pomoću toplotne integracije", pages = "602-598", doi = "10.7251/EEMEN1501598Z" }
Zarić, M. M., Stijepović, M., Linke, P., Kijevčanin, M., Stajić-Trošić, J.,& Bugarski, B.. (2015). Optimization of waste heat recovery via heat integration. in Knjiga radova = Proceedings / IV međunarodni kongres "Inženjerstvo, ekologija i materijali u procesnoj industriji", Jahorina, 04.03.- 06.03. 2015. = IV International Congress "Engineering, Ecology and Materials in the Processing Industry" Zvornik : Tehnološki fakultet., 598-602. https://doi.org/10.7251/EEMEN1501598Z
Zarić MM, Stijepović M, Linke P, Kijevčanin M, Stajić-Trošić J, Bugarski B. Optimization of waste heat recovery via heat integration. in Knjiga radova = Proceedings / IV međunarodni kongres "Inženjerstvo, ekologija i materijali u procesnoj industriji", Jahorina, 04.03.- 06.03. 2015. = IV International Congress "Engineering, Ecology and Materials in the Processing Industry". 2015;:598-602. doi:10.7251/EEMEN1501598Z .
Zarić, Milana M., Stijepović, Mirko, Linke, Patrick, Kijevčanin, Mirjana, Stajić-Trošić, Jasna, Bugarski, Branko, "Optimization of waste heat recovery via heat integration" in Knjiga radova = Proceedings / IV međunarodni kongres "Inženjerstvo, ekologija i materijali u procesnoj industriji", Jahorina, 04.03.- 06.03. 2015. = IV International Congress "Engineering, Ecology and Materials in the Processing Industry" (2015):598-602, https://doi.org/10.7251/EEMEN1501598Z . .