Search
Now showing items 1-8 of 8
Avoidance of tunnel type defect in FSW welded Al 5052-H32 plates / Eliminacija tunela pri zavarivanju trenjem alatom legure Al 5052-H32
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2012)
Some experiences in elimination of tunnel type defect Friction Stir Welding of Al alloy 5052-H32 are presented in this paper. In order to evaluate the influence of the processing parameter (ratio between rotation and ...
Influence of initial state on properties of mma welded 14mov 6 3 steel / Uticaj polaznog stanja na osobine REL zavarenog spoja čelika 14mov 6 3
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2012)
The aim of this work was to establish the influence of initial state of base metal on properties of mma welded 14MoV 6 3 steel. Three combinations of specimens were welded: (i) virgin-virgin (N-N); (ii) used-used (S-S); ...
Savremeni čelici - dvojnikovanjem izazvana plastičnost
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2014)
A significant increase in the research activity dedicated to high manganese TWIP steels has occurred during the past few years, motivated by the breakthrough combination of strength and ductility possessed by these alloys. ...
Mechanical and structural properties of friction stir weld of dissimilar aluminum alloys / Mehahička i strukturna svojstva spojeva od raznorodnih aluminijumskih legura zavarenih FSW postupkom
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2017)
In this work, the structural and mechanical properties of friction stir welded dissimilar butt joints of AA2024-T351 to AA5083-H112 aluminum alloys were evaluated. Plates of 6 mm thick were friction stir welded with optimized ...
Change of temperature and vertical force during friction stir welding / Promena temperature i vertikalne sile tokom procesa zavarivanja trenjem mešanjem
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2013)
The aim of this paper is to analyze changes of vertical force and temperature during friction stir welding process of high strength aluminum alloys (2024 T3). FSW process is a complex nonlinear process accompanied by large ...
Experimental laboratory for development of fillers and auxiliary materials for welding and soldering (2) / Eksperimentalna laboratorija za razvoj dodatnih i pomoćnih materijala za zavarivanje i lemljenje (2)
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2014)
Optimizing the content of nickel in flux-cored wire intended for welding micro-alloyed steels / Optimizacija sadržaja nikla u punjenoj žici namenjenoj za zavarivanje mikrolegiranih čelika
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2014)
This paper presents the results related to organizing production of flux-cored wire alloyed with Ni and Mo according to standard AWS A5.29 intended for the MAG welding process. On the experimental line for steel strip ...
Experimental laboratory for development of fillers and auxiliary materials for welding and soldering / Eksperimentalna laboratorija za razvoj dodatnih i pomoćnih materijala za zavarivanje i lemljenje
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2013)
The development of new materials and their use in construction of modern devices and structures requires the development of fillers and auxiliary materials for their joining. Development and mastering of production of ...