Multiphysics modeling of electric-swing adsorption system with in-vessel condensation
Само за регистроване кориснике
2007
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Mathematical modeling of an Electric-Swing Adsorption (ESA) system (adsorption cycle with electrothermal desorption step, performed by direct heating of the adsorbent particles by passing electric current through them), with annular, radial-flow, cartridge-type fixed-bed and in-vessel condensation, is performed by using Comsol Multiphysics (TM) software. Three multiphysics models are built, in order to describe three stages of a compete ESA cycle: adsorption, electrothermal desorption before the start of condensation and electrothermal desorption with in-vessel condensation. In order to describe the complete ESA cycle the models for the three stages are integrated, by using a combination of Comsol Multiphysics (TM) and Matlab (TM). The models were successfully used for simulation of separate stages of the process and of the complete ESA cycles, as well as for investigation of the influences of the main operational parameters on the process performance.
Кључне речи:
multiphysics modeling / Electric-Swing Adsorption (ESA) / electrothermal desorption / in-vessel condensationИзвор:
Adsorption-Journal of the International Adsorption Society, 2007, 13, 3-4, 357-372Издавач:
- Springer, Dordrecht
Финансирање / пројекти:
- Истраживање феномена преноса значајних за развој вишефазних процеса и опреме (RS-MESTD-MPN2006-2010-142014)
DOI: 10.1007/s10450-007-9028-2
ISSN: 0929-5607
WoS: 000251307100023
Scopus: 2-s2.0-36649011750
Институција/група
Tehnološko-metalurški fakultetTY - JOUR AU - Petkovska, Menka AU - Antov-Bozalo, Danijela AU - Marković, Ana AU - Sullivan, Patrick PY - 2007 UR - http://TechnoRep.tmf.bg.ac.rs/handle/123456789/1128 AB - Mathematical modeling of an Electric-Swing Adsorption (ESA) system (adsorption cycle with electrothermal desorption step, performed by direct heating of the adsorbent particles by passing electric current through them), with annular, radial-flow, cartridge-type fixed-bed and in-vessel condensation, is performed by using Comsol Multiphysics (TM) software. Three multiphysics models are built, in order to describe three stages of a compete ESA cycle: adsorption, electrothermal desorption before the start of condensation and electrothermal desorption with in-vessel condensation. In order to describe the complete ESA cycle the models for the three stages are integrated, by using a combination of Comsol Multiphysics (TM) and Matlab (TM). The models were successfully used for simulation of separate stages of the process and of the complete ESA cycles, as well as for investigation of the influences of the main operational parameters on the process performance. PB - Springer, Dordrecht T2 - Adsorption-Journal of the International Adsorption Society T1 - Multiphysics modeling of electric-swing adsorption system with in-vessel condensation EP - 372 IS - 3-4 SP - 357 VL - 13 DO - 10.1007/s10450-007-9028-2 ER -
@article{ author = "Petkovska, Menka and Antov-Bozalo, Danijela and Marković, Ana and Sullivan, Patrick", year = "2007", abstract = "Mathematical modeling of an Electric-Swing Adsorption (ESA) system (adsorption cycle with electrothermal desorption step, performed by direct heating of the adsorbent particles by passing electric current through them), with annular, radial-flow, cartridge-type fixed-bed and in-vessel condensation, is performed by using Comsol Multiphysics (TM) software. Three multiphysics models are built, in order to describe three stages of a compete ESA cycle: adsorption, electrothermal desorption before the start of condensation and electrothermal desorption with in-vessel condensation. In order to describe the complete ESA cycle the models for the three stages are integrated, by using a combination of Comsol Multiphysics (TM) and Matlab (TM). The models were successfully used for simulation of separate stages of the process and of the complete ESA cycles, as well as for investigation of the influences of the main operational parameters on the process performance.", publisher = "Springer, Dordrecht", journal = "Adsorption-Journal of the International Adsorption Society", title = "Multiphysics modeling of electric-swing adsorption system with in-vessel condensation", pages = "372-357", number = "3-4", volume = "13", doi = "10.1007/s10450-007-9028-2" }
Petkovska, M., Antov-Bozalo, D., Marković, A.,& Sullivan, P.. (2007). Multiphysics modeling of electric-swing adsorption system with in-vessel condensation. in Adsorption-Journal of the International Adsorption Society Springer, Dordrecht., 13(3-4), 357-372. https://doi.org/10.1007/s10450-007-9028-2
Petkovska M, Antov-Bozalo D, Marković A, Sullivan P. Multiphysics modeling of electric-swing adsorption system with in-vessel condensation. in Adsorption-Journal of the International Adsorption Society. 2007;13(3-4):357-372. doi:10.1007/s10450-007-9028-2 .
Petkovska, Menka, Antov-Bozalo, Danijela, Marković, Ana, Sullivan, Patrick, "Multiphysics modeling of electric-swing adsorption system with in-vessel condensation" in Adsorption-Journal of the International Adsorption Society, 13, no. 3-4 (2007):357-372, https://doi.org/10.1007/s10450-007-9028-2 . .