Претраживање
Приказ резултата 21-30 од 713
Experimental and numerical analysis of local mechanical properties of globe valve housing
(Chemicke Listy, 2012)
Experimental and Numerical Analysis of Local Mechanical Properties of Globe Valve Housing One of the most widely used industrial valves is globe valve. Due to wide industrial application, the valve is subjected to various ...
Deformation mechanisms in ti3al-nb alloy at elevated temperatures
(Institute of Metals and Technology, 2010)
Ti3Al-11Nb-1V (x/%) was made in a vacuum arc furnace. Hot-rolling was conducted at 1050 degrees C in a two-phase field of the alloy. Strain-rate jump tests were performed at T = 800-1100 degrees C and strain rates of 10(-6) ...
Derived thermodynamic properties of alcohol + cyclohexylamine mixtures / Izvedene termodinamičke osobine smeša alkohol + cikloheksilamin
(Serbian Chemical Society, Belgrade, 2010)
Thermal expansion coefficients, α, excess thermal expansion coefficients, αE, isothermal coefficients of pressure excess molar enthalpy, (∂HE/∂p)T,x, partial molar volumes, V¯i, partial molar volumes at infinite dilution, ...
Optimization of Active Carbonaceous Material Obtained by Low Hydrothermal Carbonization of Plane Tree Seed with H3PO4
(Trans Tech Publications Ltd, Durnten-Zurich, 2017)
Activated carbons (ACs) were successfully prepared using plane tree seed (PTS) as a cheap and renewable raw material. The plane tree seeds were firstly treated combining magnetic (MM) and ultrasonic mixing (USM) during ...
Simplification of the synthesis of the reversible addition-fragmentation chain transfer agent 2-(2-cyanopropyl)-dithiobenzoate / Pojednostavljenje postupka sinteze raft agensa 2-(2-cijanopropil)-ditiobenzoata
(Serbian Chemical Society, Belgrade, 2010)
The general literature procedure for the preparation of the reversible addition-fragmentation chain transfer (RAFT) agent 2-(2-cyanopropyl)-dithiobenzoate (CPDB) was modified by omitting the recrystallisation of the ...
Modeling of strength degradation during water quench test of low cement high alumina castable
(University of Chemistry and Technology, Prague, 2010)
Low cement high alumina castable was synthesized, cured, and then sintered at 1100 degrees C for 3 hours. Water quench test was used as an experimental method for thermal stability testing. Image analysis program was applied ...
Influence of the way of synthesis of poly(methyl methacrylate) in the presence of surface modified TiO2 nanoparticles on the properties of obtained nanocomposites / Uticaj načina sinteze poli(metil metakrilata) u prisustvu površinski modifikovanih TiO2 nanočestica na svojstva dobijenih nanokompozita
(Association of Chemical Engineers of Serbia, 2010)
Incorporation of inorganic nanoparticles can significantly affect the properties of the polymer matrix. The properties of polymer nanocomposites depend on the type of incorporated nanoparticles, their size and shape, their ...
Solubility in K+-Na+-Mg (4) (2-) aqueous solution at T=298.15 K
(Maik Nauka/Interperiodica/Springer, New York, 2013)
In the salt solubility predictions for K+-Na+-Mg (4) (2-) aqueous solution the treatment of thermodynamic data of three-component systems at T = 298.15 K involved the application of the Extended Pitzer's ion-interaction ...
Urban deciduous tree leaves as biomonitors of trace element (As, V and Cd) atmospheric pollution in Belgrade, Serbia / Ispitivanje zagađenosti vazduha u Beogradu elementima u tragovima (As, V, Cd) iz listova listopadnog drveća
(Serbian Chemical Society, Belgrade, 2010)
Leaves of common deciduous trees: horse chestnut (Aesculus hippocastanum) and linden (Tilia spp.) from three parks within the urban area of Belgrade were studied as biomonitors of trace element (As, V, and Cd) atmospheric ...
Differences in the electrochemical behavior of ruthenium and iridium oxide in electrocatalytic coatings of activated titanium anodes prepared by the sol-gel procedure / Razlike u elektrohemijskom ponašanju oksida rutenijuma i iridijuma u elektrokatalitičkim prevlakama aktiviranih titanskih anoda dobijenih sol-gel postupkom
(Serbian Chemical Society, Belgrade, 2010)
The electrochemical characteristics of Ti0.6Ir0.4O2/Ti and Ti0.6Ru0.4O2/Ti anodes prepared by the sol-gel procedure from the corresponding oxide sols, obtained by force hydrolysis of the corresponding metal chlorides, were ...