Претраживање
Приказ резултата 121-129 од 129
Phase composition of Bi2O3 specimens doped with Ti, Zr and Hf
(Belgrade : Serbian Chemical Society, 2012)
Powder mixtures of α-Bi2O3 containing 2, 5 and 10 mole % of TiO2, ZrO2 or HfO2 were homogenized, heated at 820ºC for 24 h and quenched in air. X-ray powder diffraction technique was used to characterize the prepared samples. ...
Uticaj parametara neselektivne oksidacije na sadržaj funkcionalnih grupa u celuloznim vlaknima / Influence of the nonselective oxidation conditions onto functional groups content in cellulose fibers
(Beograd : Srpsko hemijsko društvo, 2012)
In this paper, the influence of oxidation with hydrogen peroxide onto functional groups content in natural cellulose fibers was studied. Changes in fibers obtained at various modification conditions were evaluated by ...
Impact analysis of airborn pollution due to magnesium slag deposit and climatic changes condition
(Soc Ecological Chemistry & Engineering, Opole, 2012)
The impact of airborne pollution by slag from magnesium production was analyzed under different climate conditions. The slag is characterized by X-ray diffraction analysis, scanning electron microscopy, differential thermal ...
Whey as a raw material for the production of functional beverages / Surutka kao sirovina za proizvodnju funkcionalnih napitaka
(Association of Chemical Engineers of Serbia, 2012)
One of the least utilized by-products of food industry, despite the great potential that is described, is the whey, which is obtained as a by-product of the technological process production of cheese and casein. The excess ...
Poly(urethane-siloxane)s based on hyperbranched polyester as crosslinking agent: Synthesis and characterization / Poli(uretan-siloksani) na bazi hiperrazgranatog poliestra kao umreživača - sinteza i karakterizacija
(Serbian Chemical Society, 2012)
A series of novel polyurethane crosslinked structures (PUs) was prepared from α,ω-dihydroxy-(ethylene oxide-poly(dimethylsiloxane)-ethylene oxide) (EO-PDMS-EO), 4,4'-methylenediphenyl diisocyanate and Boltorn ® hyperbranched ...
A coupled thermo-mechanical model of friction stir welding
(Vinca Institute of Nuclear Sciences, 2012)
A coupled thermo-mechanical model was developed to study the temperature fields, the plunge force and the plastic deformations of Al alloy 2024-T351 under different rotating speed: 350, 400, and 450 rpm, during the friction ...
Friction-stir welding of high-strength aluminium alloys and a numerical simulation of the plunge stage
(Institute of Metals and Technology, 2012)
This paper defines a set of welding parameters for the Friction-Stir Welding (FSW) of two forged panels of the alloy EN AW 7049A in a T652 temper and discusses the plunge stage of FSW using numerical modeling. This ...
Određivanje efektivnog koeficijenta difuzije prilikom sušenja uzoraka od gline / Calculation of the effective diffusion coefficient during the drying of clay samples
(Srpsko hemijsko društvo, Beograd, 2012)
Cilj ovog rada je da se na primeru dve opekarske gline sa različitih lokaliteta odredi efektivni koeficijenat difuzije na osnovu eksperimentalno snimljenih krivih sušenja. Razvijen je metod i napravljena su dva kompjuterska ...
Supercritical extraction of essential oil from Mentha and mathematical modelling- the influence of plant particle size
(Elsevier Science Bv, Amsterdam, 2012)
Supercritical CO2 extraction was studied using dried leaves of Mentha, originated from the northern part of Libya. Leaves were milled and sieved to obtain different average particles (d(p) = 0.25 - 0.80 mm). They were ...