Претраживање
Приказ резултата 31-40 од 346
Micro-environmentally restricted hybridoma cell growth within polysaccharide hydrogel microbeads
(IOS Press, Amsterdam, 2013)
The mechanism of micro-environmentally restricted hybridoma cell growth caused by action of local mechanical compression stress generated within various polysaccharide hydrogel matrixes is estimated by comparing the growth ...
Dynamic mechanical properties of aramid fabrics impregnated with carbon nanotube/poly (vinyl butyral)/ethanol solution
(Association of Metallurgical Engineers of Serbia, 2013)
In this study six samples of polyurethane/p-aramid multiaxial fabric forms (Colon fabrics) were coated with 10 wt.% poly (vinyl butyral) (PVB)/ethanol solution with the addition of multiwalled carbon nanotubes (MWCNT). The ...
Cerium oxide as conversion coating for the corrosion protection of aluminum
(International Association of Physical Chemists (IAPC), 2013)
CeO2 coatings were formed on the aluminum after Al surface preparation, by dripping the ceria sol, previously prepared by forced hydrolysis of Ce(NO3)4. The anticorrosive properties of ceria coatings were investigated by ...
Treatment of Waste Copper Electrolytes Using Insoluble and Soluble Anodes
(Electrochemical Science Group, Beograd, 2013)
The use of copper anodes with non standard content of impurities for the treatment of waste, sulphur acid solutions that came as a result of the industrial process of electrolytic copper refining was investigated. Those ...
Novel negatively-charged ultrafiltration membranes made by a combination of immersion precipitation and photopolymerization
(Belgrade : Serbian Chemical Society, 2013)
Ultrafiltration (UF) membranes are currently used in industry for the concentration of proteins and other macromolecules. Performance of UF membranes is generally limited by a trade-off between permeability and selectivity ...
Evaluation of a novel top-of-The-line corrosion (TLC) mitigation method in a large scale flow loop
(Corrosion 2013, 2013)
Innovative top-of-The-line corrosion (TLC) inhibition techniques are being investigated as an alternative to batch treatment. A novel idea consists of injecting the corrosion inhibitor within a foam matrix. Previously, a ...
Lead concentrations and isotope ratios in urban tree leaves
(Elsevier, Amsterdam, 2013)
Variation in stable lead isotopic composition has been recognized as a suitable indicator for source identification of Pb contamination in the environment. Some deciduous tree leaves have been reported as useful biomonitors ...
Modeling of metallurgical properties of sinter mixtures of non-standard raw iron-bearing materials
(Editura Stiintifica Fmr, Bucharest, 2013)
Present paper represents a methodology for establishing a relationship between the composition of mixtures of iron-bearing non-standard dispersed raw materials for production of sinter and its most important metallurgical ...
The influence of the size and surface modification of TIO2 nanoparticles on the rheological properties of alkyd resin / Uticaj veličine nanočestica TIO2 i njihove površinske modifikacije na reološka svojstva alkidne smole
(Association of Chemical Engineers of Serbia, 2013)
Spherical TiO2 particles of different size were dispersed in alkyd resin based on soybean oil. Four samples of TiO2 particles were used, three commercial and one obtained by acid catalyzed hydrolysis of titanium ...
Life extension of gears flank surfaces regenerated by hard facing
(Editura Stiintifica Fmr, Bucharest, 2013)
This paper contains the results of experimental analysis of fatigue endurance of used steel teeth regenerated by hard facing. The cylindrical spur gears were tested and compared with the newly made ones, oiler being ...