Претраживање
Приказ резултата 21-30 од 58
Preparation of low cost alumina nanofibers via electrospinning of aluminium chloride hydroxide/poly (vinyl alcohol) solution
(Elsevier Sci Ltd, Oxford, 2013)
Alumina nanofibers are very suitable materials for use as reinforcement in a great variety of high performance composite materials. Nanosized alumina fibers were prepared from the aluminum chloride hydroxide/poly (vinyl ...
Lead immobilization by geopolymers based on mechanically activated fly ash
(Elsevier Sci Ltd, Oxford, 2014)
In this paper, the effectiveness of geopolymers based on initial and mechanically activated fly ash in immobilization of lead was investigated. Fly ash (FA) was firstly mechanically and then alkali activated at room ...
The influence of fluorine doping on the structural and electrical properties of the LiFePO4 powder
(Elsevier, 2017)
Low intrinsic electronic conductivity is the main disadvantage of LiFePO4 when used as a cathode material in lithium ion batteries. The paper offers experimental proofs of the theoretical prediction that fluorine doping ...
Spherical assemblies of titania nanotubes generated through aerosol processing
(Elsevier Sci Ltd, Oxford, 2015)
We report on the possibility to build hierarchically organized three-dimensional (3D) titania spherical particles having high surface-to-volume-ratio, by aerosol processing of nanotubular building blocks. Morphology and ...
Visible-light active mesoporous, nanocrystalline N,S-doped and co-doped titania photocatalysts synthesized by non-hydrolytic sol-gel route
(Elsevier Sci Ltd, Oxford, 2016)
Visible-light active mesoporous N,S-doped and co-doped anatase TiO2 powders were synthesized by non-hydrolytic sol-gel route, starting from TiCl4 and Ti((OPr)-Pr-i)(4) dissolved in cyclohexane or dimethyl sulfoxide, later ...
Influence of different pore-forming agents on wollastonite microstructures and adsorption capacities
(Elsevier Sci Ltd, Oxford, 2017)
In this study, porous macro- and micro-cellular wollastonite-based ceramics was synthesized. A ceramic precursor, methylhydrocyclosiloxane, together with micro-sized CaCO3, was used as a starting material. After 20 min of ...
Substrate preheating and structural properties of power plasma sprayed hydroxyapatite coatings
(Elsevier Sci Ltd, Oxford, 2016)
The aim of the present study was to investigate the influence of substrate preheating on the structural properties of hydroxyapatite coatings (HACs) deposited by using the high power (52 kW) laminar plasma jet. The deposition ...
CdS quantum dots sensitized TiO2 nanotubes by matrix assisted pulsed laser evaporation method
(Elsevier Sci Ltd, Oxford, 2016)
Within this study a matrix assisted pulsed laser evaporation technique was employed for deposition of CdS quantum dots onto TiO2 nanotubes. The number of laser pulses and laser fluence were varied to control the amount of ...
Ex-situ sensitization of ordered TiO2 nanotubes with CdS quantum dots
(Elsevier Sci Ltd, Oxford, 2015)
Ordered titania nanotubes (pore diameter approximate to 90 nm and wall thickness approximate to 10 nm) were obtained by the anodization technique and used for the ex-situ deposition of cadmium sulfide quantum dots (CdS ...
Highly ordered macroporous gamma-alumina prepared by a modified sol-gel method with a PMMA microsphere template for enhanced Pb2+, Ni2+ and Cd2+ removal
(Elsevier Sci Ltd, Oxford, 2017)
The adsorption performance of three-dimensionally ordered macroporous (3DOM) gamma-alumina was investigated for enhanced Pb2+, Ni2+ and Cd2+ removal. The synthesis was based on a modified sol-gel method using a colloidal ...