Pretraživanje
Prikaz rezultata 21-30 od 32
Electrochemical and sorption characteristics and thermal stability of epoxy coatings electrodeposited on steel modified by Zn-Co alloy
(Elsevier Science Sa, Lausanne, 2002)
The corrosion behaviour, transport properties and thermal stability of epoxy coatings electrodeposited on steel and steel modified by Zn-Co alloys were investigated during exposure to 3% NaCl solution. The electrochemical ...
The sorption characteristics of epoxy coatings electrodeposited on steel during exposure to different corrosive agents
(Pergamon-Elsevier Science Ltd, Oxford, 1996)
Organic protective coatings on steel were formed by cathodic electrodeposition of an epoxy resin modified by an amine and isocyanate using a constant voltage method (resin concentration 10% wt, temperature 26 degrees C, ...
Protective properties of epoxy coatings electrodeposited on steel electrochemically modified by Zn-Ni alloys
(Elsevier Science Sa, Lausanne, 2004)
A review is given on Zn-Ni alloys electrochemically deposited on steel under various deposition conditions. The influence of deposition current density and type of deposition solution on the chemical content, phase structure ...
The influence of zinc surface pretreatment on the adhesion of epoxy coating electrodeposited on hot-dip galvanized steel
(Elsevier Science Sa, Lausanne, 2007)
The adhesion and electrochemical properties of epoxy coatings electrodeposited on hot-dip galvanized steel with and without passive films were investigated during exposure to 3% NaCl. The passive films were formed in hot ...
Determination of the protective properties of electrodeposited organic epoxy coatings on aluminium and modified aluminium surfaces
(Pergamon-Elsevier Science Ltd, Oxford, 2005)
The electrochemical and transport properties and thermal stability of epoxy coatings electrodeposited on aluminium and modified aluminium surfaces (anodized, phosphatized and chromatized-phosphatized aluminium) have been ...
Corrosion protection of aluminium by a cataphoretic epoxy coating
(Elsevier Science Sa, Lausanne, 1999)
The corrosion behavior and thermal stability of epoxy coating electrodeposited on aluminium have been investigated during exposure to 3% NaCl. Electrochemical impedance spectroscopy (EIS), gravimetric liquid sorption ...
The influence of steel surface modification by electrodeposited Zn-Fe alloys on the protective behaviour of an epoxy coating
(Elsevier Science Sa, Lausanne, 2003)
The electrochemical and transport properties of epoxy coatings electrodeposited on steel and steel modified by Zn-Fe alloys were investigated during exposure to 3% NaCl. The Zn-Fe alloys were deposited on steel surface ...
Initial corrosion protection of Zn-Mn alloys electrodeposited from alkaline solution
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
The effects of a deposition current density (c.d.) on the corrosion behaviour of Zn-Mn alloy coatings, deposited from alkaline pyrophosphate solution, were investigated by atomic absorption spectrophotometry (AAS), X-ray ...
Corrosion protection of aluminium pretreated by vinyltriethoxysilane in sodium chloride solution
(Pergamon-Elsevier Science Ltd, Oxford, 2010)
The corrosion protection of vinyltriethoxysilane (VTES) films on aluminium during exposure to 3% NaCl was investigated using electrochemical impedance spectroscopy (EIS), potential-time measurements and optical microscopy ...
Chemical vapour deposition at atmospheric pressure of graphene on molybdenum foil: Effect of annealing time on characteristics and corrosion stability of graphene coatings
(Pergamon-Elsevier Science Ltd, Oxford, 2016)
In this work, the effect of pre-annealing of Mo substrate on the quality of graphene layers grown by chemical vapour deposition was investigated by X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy. ...